Replacement Friction Discs for Fulton K1550 Brake Winch

Question

Question:

I have a fulton k1550 winch. I need new friction discs. manual calls for #1588S00 which appears to be unavailable. Is there a suitable replacement? If that is not possible I need a recomendation on a cable brake winch 2500 lbs.

asked by: David

1

Helpful Expert Reply:

There is indeed a suitable replacement.

The Fulton 1588S00 was replaced by the # F501115 which we carry. They are sold in a quantity of 2.

expert reply by: Mike L

1

Answer 1

The Replacement Friction Disc, part #F501115 (for Fulton 1,500 lb Trailer Winches #F143100 and #F142201) has an overall diameter of 2-1/4 inches, center hole diameter of 1/2 inch and a thickness of 3/32 inch. The replacement pinion shaft repair kit…

view full answer...

Answer 2

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 3

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Answer 4

Hey Doug, yes the Furrion Chill Cube #FR49TD thermostat does work with your furnace. We have confirmed this with Furrion in the past. How do you like the Suburban furnace?

view full answer...

Answer 5

The B and W Companion hitch part #BWRVK3305 that you referenced weighs 159 lbs. The head is easily removed to make the install and removal of the hitch easier as well since it splits the weight up. The head weighs 71 lbs.

view full answer...

Answer 6

The photo of the AC nameplate didn't come through but that's okay, as based on the model number I was able to verify with Dometic the correct replacement shroud for your Dometic 457915 AC, which is the following: - Replacement Shroud…

view full answer...

Answer 7

The shipping weight of the B&W Companion OEM 5th Wheel Hitch #BWRVK3305 is 152 lbs so it will be just under that after you remove the packaging. Although it is still pretty hefty, the head unit part #BWRVC3006 can easily be removed off of the…

view full answer...

Answer 8

Changing the positioning of the support arms that hold the head of the B&W Companion #BWRVK3300 will shift the pin weight of the trailer. Ideally you will want to keep the king pin centered over the rear axle of the truck or slightly forward of…

view full answer...

Answer 9

The discs you are looking for can be found right here Replacement Friction Discs for Fulton Brake Winch - 1,500-lbs - Qty 2 #F501115. These will replace two friction discs on your Fulton High-Performance Brake Winch - Winch Only - 1,500 lbs #F143100

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Friction Discs for Fulton K1550 Brake Winch

Continue Researching