Class 3 Trailer Hitch For A 2017 Honda CRV

Question

Question:

What model of class lll 2” trailer hitches do you offer for a 2017 Honda CRV? Which models require trimming of the rear facia? Thanks

asked by: Doug

0

Expert Reply:

Hi Doug!

We have a few Class III hitch options available for your 2017 Honda CRV. All but the Draw-Tite Max-Frame # 76128 will require trimming of the fascia, so if you are wanting to avoid that it will be the one to go with. However, it will be more visible once installed, as seen in the picture I have linked.

If you aren't worried about a little trimming, the Curt # C13397 would be much more hidden. If it were me, I would go this direction as it is more of a "stock" kind of look. And The Curt is American made!

What are you planning on using a hitch for?

expert reply by: Lazer S

0

Draw-Tite Hitch Honda CRV
(click to enlarge)

Curt Hitch Honda CRV
(click to enlarge)

Doug

6/30/2025

Bike rack

Lazer S.

6/30/2025

@Doug Either option would work perfectly for a bike rack. If you are going to leave the bike rack installed most of the time, I would probably go with the Draw-Tite as the more exposed design wouldn't really matter at that point. If the rack isn't going to be in the hitch all the time, I would then go for the Curt

Answer 1

Hello Joseph, thanks for reaching out. We do have class 3 hitch options for your 2017 Honda CR-V. There are two options to consider. Both of there options bolt up to the frame, and would not require removal of the impact structure. The first is the…

view full answer...

Answer 2

The available trailer hitches for your 2019 Honda CR-V can be pretty easily categorized into hidden and non-hidden groups. I highly recommend going with a hidden-crosstube hitch, especially on a new vehicle like yours, as this is going to create a…

view full answer...

Answer 3

Hello Lee, After looking carefully through the hitches, the only one that I see that does not require an trimming is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #76128, which happens to be the one that you have…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Erica, thanks for reaching out! Since your 2026 Honda CR-V is a Hybrid we're a bit limited on the hitch options, and you'll need to get one that does require some fascia cutting. For this, I recommend the etrailer Trailer Hitch Receiver…

view full answer...

Class 3 Trailer Hitch For A 2017 Honda CRV

Products Featured in This Question

Continue Researching