Replacement Parts for a Maxxair Vent Fan

Question

Question:

Do you have a parts list for the Maxxair venting fans?

asked by: Ralph S

0

Expert Reply:

No, I do not Ralph. What model Maxxair vent fan do you have and what part are you needing to replace?

You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.

expert reply by: Jerred H

0

Jerred H.

9/2/2025

Hey Ralph, did you find out which part you need for your Maxxair vent fan? If you’re still looking for a solution, I’m happy to help.

Answer 1

Hi James, I'm really sorry to tell you, but the MaxxFan Plus part #MA00-04751KSX will not work with a wireless remote. The MaxxFan Plus part #MA00-04751KSX is a direct replacement for the MaxxFan Plus original model 00-04751KS and is intended to…

view full answer...

Answer 2

Hello again Thomas! The #MA00-04751KSX does indeed need to be a wired to a wall control for it to work. It's really used as a replacement or upgrade to a pre-existing damaged or worn out unit. I believe what you are looking for is the MaxxFan…

view full answer...

Answer 3

Hi Steve; does your wall switch look like the #MA00A03550K? The Replacement MaxxFan Plus 4-Speed Roof Vent #MA00-04751KSX is designed to replace the 00-04751KS which works with this wired wall controller. If you have this switch, or the older model…

view full answer...

Answer 4

The MaxxAir MaxxFan Plus Roof Vent part #MA00-04751KSX is designed to replace an existing roof vent fan. Therefore, it does not come with everything needed for installation. The extra items you will need are as follows: Key Wall Control part…

view full answer...

Answer 5

Hey Jay! The MaxxFan Plus 4-Speed Roof Vent #MA00-04751KSX does not come with a wall controller but it is compatible with one. You will have to pick up the Replacement Key Wall Control For MaxxFan Plus and Deluxe #MA00A03550K separately.

view full answer...

Answer 6

Hey Devon, does your RV roof vent wall control unit look like the #MA59FR? If so you have a MaxxFan Plus RV roof vent that was designed for wall control and for a replacement unit you would want the part #MA00-04500K to use a setup that would use…

view full answer...

Answer 7

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Replacement Parts for a Maxxair Vent Fan

Product Page this Question was Asked From

Continue Researching