Recommended Flat Towing Set Up for a 2019 Buick Envision

Updated 09/09/2025 | Published 06/01/2025

Products Featured in This Question

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3324)

$575.00

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3186)

$179.96

Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(401)

$850.00

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(656)

$70.95

Demco Air Force One Flat Tow Brake System for RVs w/ Air Brakes - Proportional

(494)

$1329.00

Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional

(754)

$1175.00

Question:

Is there a company that sells and installs your products near me? Flat towing a 2019 Buick Envision. 91766, ty.

asked by: Ralph S

Expert Reply:

Hey Ralph. We have a large network of installers that I would be happy to get you connected to. If you go to the product page of the Roadmaster Direct-Connect Base Plate Kit item # RM-523196-5 you were looking at and scroll down below the pics on the left side you'll see a box that says, Locate installers near me. Go ahead and click on it and it will take you to a page where you'll be able to enter your zip code. Once you do this you'll be connected to our network of reputable installers in your area.

Here are the parts you will need to flat tow your 2019 Buick Envision:

Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643

Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-523196-5

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267

Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.

If you have any additional questions, go ahead and click on the box below that says Reply to Jerred H and I'll be happy to answer them.

expert reply by: Jerred H

Jerred H.

9/8/2025

Hey Ralph, did you have a chance to connect with a local installer using the tool on the product page? I'd love to know how it worked out for you, as it could help others looking to set up their Buick Envision for flat towing.

Ralph S.

9/8/2025

@JerredH Hi Jerred, Yes, the link provided local installers, however, we are on the road quite often and will likely have the work done late fall when time permits. Thanks, Ralph S.