Parts Needed to Add 4-Way and 7-Way to 2023 Ford Transit T250
Updated 09/29/2025 | Published 05/12/2025
Products Featured in This Question
Question:
I need both flat 4 and round 7 connectors added to our 2023 Transit 250. Do you need additional info regarding existing Factory wiring? Please advise. Thanks!
asked by: Cj B
Expert Reply:
Hey Cj! The wiring depends on whether or not you have the factory tow package. If you do have the factory tow package all you need is the 7- and 4-Pole Trailer Connector Socket # HM40975. The wiring connector would look like the one pictured below, probably plugged into the back of a dummy plug at the bumper.
If you don't have the factory tow package you need the Curt # C56327 along with the Universal Installation Kit for Trailer Brake Controller # ETBC7 to upgrade to a 7-way. I went ahead and attached some installation videos below for your reference. If you have any other questions feel free to reply in the comments.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- No Tow Package
- 4 Flat
- 7 Blade
- Plug Only
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: trailer wiring
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Hellwig Rear Anti-Sway Bar - 3/4" Diameter
- Shop: Brake Controller
- Shop: Performance Chip Tuners
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Shop: Replacement OEM Wiring Harness for Ford F-150
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Is Drilling Required For Installation Of Roadmaster Front Anti-Sway Bar on 2026 Jayco Melbourne 24L
- Article: How to Measure for Trailer Hitch Drop
- Q&A: 2025 Kia Sportage PHEV
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Q&A: Will Dexter 7K Tow Assist ABS Brake Assemblies Fit Lippert 7K Axles With ABS?
- Q&A: Availability of Victron DC/DC Battery Charger With Lithium Compatibility and Engine On Detection
Robin H.
9/29/2025
Hey Cj, did you find out if your Transit 250 has the factory tow package? I'm curious to know how the installation went for you, as it could help others looking to add similar connectors.