Uni-Servo Hydraulic Trailer Brakes For 7 Inch Drums
Published 08/17/2022
Question:
Do you have a hydraulic trailer brake kit uni servo free backing left and right hand for a 7 drum size?
asked by: Robert L
Expert Reply:
There are hydraulic trailer brake kits for 7 inch drums; but there are no free-backing kits as those start at 10 inches and up. So you can get uni-servo hydraulic brakes, just not free-backing. The correct part for your 7 inch drums is the following:
- Dexter Hydraulic Trailer Brake Kit - Uni-Servo - 7" - Left and Right Hand Assemblies # 23-398-399
The Dexter # 23-398-399 is rated for axles up to 2,500 lbs, and includes the mounting hardware for installation so you don't have to purchase anything else.
Product Page this Question was Asked From
Dexter Hydraulic Trailer Brakes - Uni-Servo - 7" - Left/Right - 2.5K
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Manual Adjust
- Single Servo
- 7 x 1-3/4 Inch Drum
- 2500 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Hydraulic Trailer Brakes - Uni-Servo - 7" - Left/Right - 2.5K
- Shop: Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes - 2,000-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes - 2,000-lb E-Z Lube Axles - 5 on 4-1/2
- Search Results: trailer hubs and drums
- Search Results: trailer axles
- Search Results: dexter wheel bearings
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Shop: etrailer Hydraulic Trailer Brakes - Free Backing - E-Coat - 12" - Left/Right - 5.2K to 7K
- Video: In-Depth Review of the Dexter Hydraulic Trailer Brake Kit
- Search Results: grease seals
- Search Results: 7 inch drum
- Search Results: led light kit
- Search Results: 7 x 1~1/4 inch drum trailer brakes
- Q&A: Availability Of 7" Hub/Drum With L68149 / L44649 Bearings And 5 on 4-1/2" Bolt Pattern
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Replacing Hydraulic Brake with a 7 inch Electric Brake Assembly for 2K Axles
- Video: What to Know About the Demco Hydraulic Brake Actuator-DM72VR
- Video: What to Know About the Demco Hydraulic Brake Actuator w/ Manual Lockout
- Video: Breaking Down the Trailer Hub and Drum Assembly
- Video: What to Know About the Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes
- Video: The Low-Down on the Mounting Bolts and Hardware for 10" Brake Assemblies
- Video: Let’s Check Out the Mounting Bolts and Hardware for 10" Brake Assemblies
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Shop: Brake Controller
- Q&A: Parts Needed To Add Electric Drum Brakes To 1994 Jayco Pop-Up
- Q&A: Recommended Parts To Add Hydraulic Trailer Brakes To 2014 Shorelander Trailer For 20 Pontoon
- Q&A: Can 3,500 Lb Hub be Used to Replace 2,000 Lb Hub with Same Size Bearings
- Q&A: What Is the Difference Between a BTR and BT8 Spindle