Will the Coil SumoSprings Custom Helper Springs Fit a 4WD 2020 Ford Expedition?

Question

Question:

Will these fit on the rear of a 2020 ford limiyed expedition max, 4x4 with the towing package?

asked by: Randy R

0

Expert Reply:

Yes, they will Randy. The Coil SumoSprings Custom Helper Springs for Coil Spring Suspension item # CSS-1168R are exactly what you need for your 4WD 2020 Ford Expedition.

What kind of trailer are you towing with your Expedition?

expert reply by: Jerred H

0

2020 Ford Expedition
(click to enlarge)

Randy

4/23/2025

Thank you for the quick response. We are towing a 36’ bumper pull camper. Our expedition has the 3.73 axle ratio and max towing package.

Jerred H.

4/24/2025

@Randy You're welcome! Happy to help. Are you having sagging issues when you're towing? Because if you are a weight distribution system would be a better overall solution than the Coil SumoSprings item # CSS-1168R.

Answer 1

Hey Braden, I do have Timbren Suspension Enhancement System - Coil Spring Suspension - Rear Axle #T58GR for your 2026 Toyota Sienna, but there is not a model of Sumo Springs custom fit to your van just yet. If you want to find a Sumo Springs setup…

view full answer...

Answer 2

Hey Stefan! The Coil SumoSprings are all the same so there won't be a difference in support between part numbers. Is there a particular reason you want to install these? If it is for something like towing I would stick with the rear since that is…

view full answer...

Answer 3

I would be happy to help you. To add a roof rack to your 2018 Ford Expedition's factory raised rails, you will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2…

view full answer...

Answer 4

I have a couple of options for upgrading your Expedition's suspension and making it more comfortable when towing your travel trailer but I confirmed with both Firestone and Airlift and neither offer air bags for your vehicle. The only suspension…

view full answer...

Answer 5

Because your Expedition has a coil spring rear suspension, there isn't an air helper spring system available but we do have a helper spring option for your vehicle, though. I'd recommend the Coil Sumo Springs, part #CSS-1168R which is the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Will the Coil SumoSprings Custom Helper Springs Fit a 4WD 2020 Ford Expedition?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching