Can I Add 7-Way To 2025 Hyundai Santa Cruz?

Question

Question:

Will this 7 way fit 2025 Hyundai Santa Cruz?

asked by: Joe C

0

Expert Reply:

Hello Joe, thanks for reaching out. The Curt # C68JR is not a confirmed fit for the 2025 Hyundai Santa Cruz. This is only for the 2022-2024 models. Sadly, there is not a custom fit wiring harness for the 2025 model at this time. The only way to add a 7-way would be to use a universal harness like the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT for a 4-flat, then use the Universal Installation Kit # ETBC7 to upgrade it to a 7-way.

You will find a couple install videos for these parts below.

Leave a reply with any comments or questions and I will get back to you.

expert reply by: Jesse M

0

Jesse M.

10/27/2025

Hey Joe, did the universal harness and installation kit work out for your 2025 Santa Cruz? Knowing how that setup went could help others with the same model year.

Joe C.

10/27/2025

@JesseM Jesse I went ahead and purchased the outrageously priced factory $290 CAD hookup. Being in Canada and reading all the problems with the 2025 wiring i relented and let Hyundia take advantage of me. Thanks for your excellent website and advice!

Jesse M.

10/28/2025

@JoeC Well I am glad to hear you found a solution at least. Dealerships are notorious for price gouging for OEM parts like trailer wiring and hitches. You should be glad you still have both your arms and legs after that encounter haha! Thanks for sharing though. Good to know the OEM option is out there. Feel free to come back anytime you need anything!

Answer 1

Hey Karen, so your 2022 Hyundai Santa Cruz Premium does have the tow package based on what you have mentioned. So what you need to convert your 4-way to a 7-way and install a brake controller as easily as possible is the Curt 7-way kit part #C68JR…

view full answer...

Answer 2

I recommend using the Curt Trailer Hitch Receiver #C23WR on your 2024 Hyundai Santa Cruz. This receiver is custom fit for your vehicle so no drilling is required to bolt to your frame. When we installed this on a 2022 Santa Cruz we found it to have a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Can I Add 7-Way To 2025 Hyundai Santa Cruz?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching