Does Air Lift Load Lifter for 2016 Ford F-150 Fit with B and W Gooseneck

Question

Question:

I have a 2016 F150 Lariat 6-1/2 ft bed. Also have the BandW under bed gooseneck. Will the following work on my truck? Air Lift Loadlifter 5000 Helper Springs Rear Axle part number AL57385 Air Lift WirelessONE Compressor System For Air Helper Springs Remote - Bluetooth - Single Path. Part number AL25980 Thanks. Bill

asked by: Bill S

0

Expert Reply:

Hey Bill, yes the Air Lift Load Lifter part # AL57385 that fits your 20116 Ford F-150 does fit with your B and W Gooseneck hitch. The Compressor kit part # AL25980 also fits too. Are you getting some sag when you are towing your gooseneck trailer?

expert reply by: Jameson C

0

Bill S.

3/3/2025

Hey Jameson, thanks for the quick reply. I’m just now getting things set up to pull a fifth wheel which is pretty heavy so I’m counting on sag unless I add these. Also want to add these for extra stability.

Jameson C.

3/3/2025

@BillS Are you dead set on air bags? They definitely work but if you wanted something a little easier to maintain and overall just better at balancing ride support and ride quality I would go with a Roadactive kit part # RAS3611-YHD. Some people are air bag people and that's totally fine they work great but others prefer not messing with air pressure or worrying about leaks etc. and for those the RAS kits are really nice.

Answer 1

I appreciate the time you've spent researching all the different products; I'm happy to offer you my expert recommendation to facilitate your purchasing decision. The Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 and…

view full answer...

Answer 2

Hello Cindy, thanks for getting in touch, and for providing all of that detailed info. I do feel that your truck will be able to safely pull the travel trailers you are looking at. The Grand Design Imagine XLS 22MLE you mentioned has a GVWR of 6,995…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 10

Hello Dan, Great question. When you’re comparing the Firestone kits #F59VV and #F2582, they both technically fit your 2025 F-150, but they are designed around different mounting locations and truck configurations. The #F2582 is the traditional…

view full answer...

Answer 11

Hey Douglas, whenever available I recommend going with the HD version of the Roadactive kits like the part #RAS3611-YHD that fits your 2022 Ford F-150 4WD. The extra capacity of this kit over the non-HD basically doesn't have any downside aside…

view full answer...

Answer 12

Hey Don, thanks for the information! That's a significant amount of sag and a pretty heavy trailer, I recommend the Hellwig Pro Series Helper Springs item #HE79FR for the higher 2,500 lbs capacity. I doubt you're driving around with your bed…

view full answer...

Does Air Lift Load Lifter for 2016 Ford F-150 Fit with B and W Gooseneck

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching