Is Weather Tech TechLiner Easy to Cut for Access to 5th Wheel Prep Pucks

Question

Question:

Is this Berliner easy to cut for 5th wheel prep?

asked by: Joshua K

0

Expert Reply:

Hey Joshua, with a utility knife the WeatherTech TechLiner part # WT52UK will not be difficult to cut to open up to your 5th wheel prep pucks. What hitch do you have?

expert reply by: Jameson C

0

Josh

2/11/2025

Thanks. I have an Anderson Hitch.

Jameson C.

2/11/2025

@Josh Nice! How do you like it? It's definitely the lightest hitch solution around.

Josh

2/11/2025

@JamesonC I like it. Being lightweight, I can put in/take out on my own. It is really easy to get hitched. I had a GMC 2500 standard bed so it was good for the shorter bed. Now with a f350 8', I'm going to stick with it for the ease of taking it off when needed.

Jameson C.

2/11/2025

@Josh Nice! Glad to hear you like and also to hear it had enough offset to work with your short bed truck. Were you able to make 90 degree turns.

See All (5) Replies to Josh ∨

Answer 1

The #DM8550045 and #DM8550045-5W are exactly the same thing. The only difference between the two is the part number which is honestly more of an internal thing. Basically, we market it as a 5th wheel hitch and as a gooseneck to 5th wheel adapter. Its…

view full answer...

Answer 2

No, I am sorry it does not Dave. None of our mats like the DeeZee Custom-Fit Truck Bed Mat item #DZ35GJ come with the puck pattern shown on the mat. If you have any additional questions feel free to reach out below in the comment box.

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Robert, congrats on your new 5th wheel trailer! It is highly recommended to use a sliding hitch like the B&W Companion item #BWRVK3370 the shorter 6-3/4' bed on your 2026 Ford F-350. The slider will ensure you have clearance when making…

view full answer...

Is Weather Tech TechLiner Easy to Cut for Access to 5th Wheel Prep Pucks

Product Page this Question was Asked From

Continue Researching