Result: demco recon

Hi Rick, The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #GY86GR could potentially work but you'll need the correct gooseneck to fifth wheel hitch adapter or you'll want to switch to a gooseneck pin box like #GY98GR. The #GY86GR is designed…

In order to stop your turn signals and brake lights from hyperflashing with your LED taillights, you will want to install LED Light Bulb Load-Resistors on the turn light and brake signal wires. Hyperflashing is a common issue when changing…

You may not even need load resistors to switch to LED lights. The best thing to do is to try the lights without load resistors first. No need to purchase something you may not need until you know need it. Load resistors such as #DI34ZR dissipate heat…

Yes, the B and W Turnoverball gooseneck hitch part #BWGNRK1108-5W that fits your 2004 Ford F-250 would fit with the air bag suspension kit you have.

You could swap the base of your Demco Recon Recessed Hitch Adapter part #DM8550046 for the part #DM6180 which would then just require a base rail kit for your 2020 Ford F-350 like the custom fit #DM8552031-71 and you'd be set.

In order to mount the Demco 18K Hijacker Autoslide 5th Wheel Trailer Hitch part #DM8550022 in the bed of your 2011 GMC Sierra 2500 you will need to use the Underbed Rail and Installation Kit for Demco Hijacker Hitches part #DM8551010. The Replacement…

I do have an option for you but there are not any custom fit gooseneck trailer hitches for your 1997 Ford F-350 Cab and Chassis. In order to install a gooseneck trailer hitch you would need to have a fabricator install a set of braces that span the…

Thank you for all of the information and pictures! It looks like you should at least have some wiring already run on your 2019 Chevy Express Van 3500 so I'm just as confused as to why you don't have a round plug with a cap inside the…

Yes. There will be a large amount of torque in this case since Sidewinder pin boxes (or your Lippert Turning Point) pivot and twist in a different way from standard pin boxes they require fifth wheel hitches to be attached to the truck in four points…

You are right on everything you have said. The manual dollies like #RA20 do not have the capacity for your 8,000 pound trailer. There is a manual crank type, #STC-V211, but its tongue weight capacity is 500 pounds. The motorized ones that you…

The Demco Recon part #DM8550045 is what you are looking for. This attaches to a standard gooseneck ball like what you have that isn't recessed and gives you a fifth wheel hitch like you are wanting. This is also lightweight for a fifth wheel…

The Demco Recon part #DM8550045 cannot be used with a pivoting pin box like your Turning Point unless you can lock out the pin box and not use a wedge so that the pin box pivots on the hitch like a standard pin box. Reason is it can not handle the…