Will Hellwig Big Wig Rear Anti-Sway Bar Fit a 2006 Dodge Ram 3500 Dually?

Question

Question:

I have a 2006 Dodge ram 3500 Duley big horn addition. will this 32RR work? ... if not what do you suggest ?

asked by: MERRILL E

0

Expert Reply:

Hey Merrill, thanks for reaching out!

The Hellwig Big Wig Rear Anti-Sway Bar # HE32RR will fit your 2006 Dodge Ram 3500 as long as it isn't a diesel.

What are you looking to accomplish by adding the bar? Is it just general use, or are you needing it for when your truck is under load?

expert reply by: Jon G

0

Merrill E.

2/7/2025

My 2006 Dodge ram is a Diesel, what are my options now? Thanks merrill

Jon G.

2/7/2025

@MerrillE With that being the case, you'll need the Roadmaster alternative, which is part # RM-1129-124.

Merrill E.

2/8/2025

I forgot about the weight. I have a 5,000 lb. Cabover Camper. The RM-1129-124 from roadmaster has a 1 1/4 in bar and the Hellwig has a 1 5/16 in bar is this ok ? Thanks MERRILL

Jon G.

2/10/2025

@MerrillE Yup! There are thicker bars if you want them, but since you were looking at that Hellwig I chose the Roadmaster with the closest diameter. The 1/16" difference won't matter between the two.

See All (5) Replies to Merrill E. ∨

Skyler

5/31/2025

Why won’t the hellwig option work if our trucks are a diesel?

Jon G.

6/6/2025

@Skyler I've been trying to dig into this, but I'm not getting any replies about why it won't fit with a diesel - just that there's a note saying it won't fit with a diesel.

Answer 1

Hey Rob, The Hellwig Big Wig Rear Anti-Sway Bar #HE92RR installs with the end links behind the axle with a mounting bracket right by the spare tire. The Roadmaster Rear Anti-Sway Bar #RM-1129-130 installs with the end links in front of the axle. I…

view full answer...

Answer 2

Hey Ryan, The Hellwig Big Wig Rear Anti-Sway Bar #HE32RR (7265) is for a 2008 Dodge Ram Pickup that has a diesel engine, while the Anti-Sway Bar #HE92RR (7266) is for a 2008 Dodge Ram Pickup that has a 4" axle tube. Just make sure you pick up…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Will Hellwig Big Wig Rear Anti-Sway Bar Fit a 2006 Dodge Ram 3500 Dually?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching