Search: torklift superhitch   >  

This will depend on if you have a Dually #TL94PR or Single #TL67DR rear wheels on your 2021 Chevrolet Silverado 3500 long bed. These are a fit for the factory receiver, if you have or want to switch to a TorkLift Receiver #TL74FR this would use a…

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

Hello Jared, thanks for reaching out. The best front hitch option for your 2024 Ford F350 DRW is the EcoHitch #EH54QR. This hitch is made specifically for dually models, and it has the higher receiver placement that you are looking for. It is a…

Thanks for the kind words! Yes, the Custom Fit Tie Down Kit item #TL82FV does include both Front item #TLF2018 and Rear item #TLF3007 tie downs. These fit the 2018 Ford F-150 with a 6-1/2' bed.

The TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" #TL49YR weights 157 pounds. It also comes with 2 included hitch pins and is 100% made in the U.S.A. The beautiful thing about this hitch is that…

Thanks for the picture! To use the TorkLift SuperTruss Hitch Extension 48" Long item #TLE1548 with your 2022 Ram 3500 you are going to want the TorkLift SuperHitch Magnum Trailer Hitch Receiver item #TLD1111-30. This hitch is custom fit and…

The battery you use for a break away system needs to be able to power the trailer brakes on full for 15 minutes. A 12 volt battery rated for 5 amp hours is normally used, unless you have 3 axles each with brakes, then you would benefit more from a 9…

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

The Curt MV Weight Distribution System part #C17057 is not ideal for c-channel trailer frames. You could still use this system on your trailer but you would want to weld steel places on the frame rails where the frame brackets of the Curt MV sit. A…

You are going to first need to contact the manufacturer of your horse trailer and ask if a weight distribution system is recommended. Sometimes aluminum trailer frames can be used with a WD, and sometimes it is not recommended. Also, you will need to…

I do have a camera system that will tie into the factory in-dash monitor on a 2010 - 2019 Ram 3500 with the Truck Bed Cargo Camera for Factory Monitor part #3460015 but this as I am sure you can see installs on the vehicle and is used predominantly…