Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Great Prices for the best truck camper tie downs from TorkLift. TorkLift Camper Tie-Downs - Custom Frame Mount - Rear part number TLR3503 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
Damage-Free Install: Bolts to existing frame holes with little to no drilling or truck mods.
Low-Profile Look: Arms remove when not in use, leaving brackets nearly hidden under truck.
Secure, Adjustable Hold: Two anchor holes help set the best tension and angle for turnbuckles.
Built to Endure: Black powder-coated steel resists rust and corrosion through harsh travel.
Features to know about
Stay Stable on the Long Haul: Frame-Mounted Security
A solid connection makes all the difference when you’re hauling a camper over long distances or rough backroads. These rear tie-downs mount directly to your truck’s frame—the strongest part of the vehicle—so your camper stays secure and your truck handles just like it does unloaded. By distributing weight evenly and keeping the center of gravity low, they prevent sway and shifting, even in strong crosswinds or uneven terrain.
Install Without Drilling: Custom-Fit Tie-Downs
The TorkLift tie-downs bolt onto pre-existing holes in your frame for a clean, custom fit. That means little to no drilling and no need to cut or modify anything. The tight frame mount keeps everything tucked up high, so you don’t lose ground clearance and don’t have to worry about dragging hardware when driving off-road or over steep driveways.
Keep It Looking Clean: Removable Design
When you’re not hauling your camper, remove the arms from the brackets and you’ll hardly notice they’re there. The brackets sit nearly flush with the frame, staying out of sight beneath the truck. This design keeps your setup looking clean while always being ready for the next trip.
Built Tough: Black Powder-Coated Steel
Each tie-down is made from black powder-coated steel that resists corrosion and holds up to years of weather and road exposure. The strong construction stands up to vibration, flex, and heavy loads so you can trust it through every season of travel.
Dial In Your Fit: Adjustable Arm Length and Anchor Points
Getting a perfect connection between your truck and camper is easy with the adjustable arms. Each arm extends out from the body to clear fenders or sidewalls and includes two anchor holes so you can set the best angle for your turnbuckles. Once tightened properly, the system locks everything down from multiple directions for a secure hold that doesn’t budge on the road.
R3503 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
WARNING: This product contains chemicals known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. For more information, go to www.p65warnings.ca.gov.
Customers Who Purchased This Truck Camper Tie Downs Also Bought...
I ordered the TorkLift Rear frame mount tie downs for our Ford f 350 so we could secure our Lance truck camper to our truck, E-Trailer was great my tie downs arrived two days earlier then expected so I opened the box and checked everything over just to make sure everything was in great shape and everything was so I decided to put them on and it only took me five to ten minutes for both .These tie downs make it very easy to secure our Lance truck camper to our truck and also make it very safe to travel on the highways and back roads 906703
A must have if your upgrading your reciever to a SuperTruss Original receiver. Easy to install. Fast shipping and reasonably priced. Welds appear to be done by someone who knew what they were doing. 3450044
by:
Charles
09/10/2019
Super fast FREE shipping! Easy installation! Much cheaper purchasing through etrailer than any trailer supply shops near my home! I’m a local business supporter but the speed of shipping and price was to good to pass up! 705217
TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear are mounted to my Torklift 20K hitch, easy to mount, worked flawlessly to hold down our camper.
Only issue is the bolts that came with the 20K hitch for the tubes are to short for the tubes and hitch you must use the extra bolts (2" grade 8) that come with the hitch. 177160
Tim
4/16/2015
Hi Scott,hey how big is the flange that bolts on to your hitch?
Scott
5/8/2015
The flange on the 20K is 6x6 3/8 thick the tube for the camper tie down mounts to the 6x6 flange
by:
Chris D.
09/08/2017
I've had these tie downs for a year now and they are still great. I'm using them on a custom installation so while I can't speak about fitment for your camper or truck; they still look great. They've been in mud and salt and still look great when hosed off. Torklift obviously does great powder coating. Mine are on an earlier truck (1981 K3500 dually) and while I modified my frame and Torklifts hitch in the truck build, the tie downs themselves are unmodified and went on super easy. I don't remove the outer post when not using the camper as they're not in the way ( maybe on a single wheel truck they would be). And I haven't heard them rattling, but mine isn't a quiet a truck. Wish Torklift made a good front mount solution too. My belly bar isn't as elegant as Torklifts mounts. 430048
by:
Lyall B.
12/19/2017
Mounted at the same time I installed TFL1002 Super Duty trailer hitch. Simple install and construction of tie downs are heavy duty. Much stronger than anything mounted to the rear bumper (happijack mounts).
Extensions slide right in and are secured with pin and clip. When removed they are barely noticeable looking at the truck from the side view. 461406
by:
Daniel
07/19/2022
So far it's great!! It took me and my buddy about 90 minutes to take off the old hitch on my 2006 Chevy 3500 dually!!! We timed ourselves! It wasn't complicated. We used a floor jack to lift the new hitch into place. All bolt holes matched perfectly. You definitely should use two people to install this thing because if it gets away from you may need to replace some fingers. It's just a heavy piece of equipment. Installing it myself saved me about $600 over having someone else install!! 1334497
by:
Dave
10/03/2022
These tiedowns were very simple to install on the end of the Torklift superHitch. If you're hauling a camper, they are a must have item. Very easy to remove when not hauling, and has a clean look. 1435456
by:
John K.
08/30/2016
Phone tech support was right on with hooking me up with the proper hitch and camper tie-downs for my application. Pricey of the TorkLift hitch, camper tie downs, and 2' double extended tow bar. Upside these are quality products that are made to do the job. Thanks to all tech support for their help! 290007
by:
Richard J
11/10/2021
Received quickly but the box was showing signs that a struggle had taken place and the box lost. Upon opening the boxes I found that several pieces from the installation kit were missing, I called and an entire new installation kit was quickly shipped to me. Installation was easy and I have been very happy with the customer service. 1200115
by:
Bernie Neale
04/07/2017
The Torklift receiver hitch and system for securing a slide in camper is a great product. 366220
by:
George
03/28/2019
I installed a Superhitch 20k on my truck and realized that my existing truck camper tiedowns would not work with the new hitch. Found a set on etrailer.com and placed the order. The new tiedowns arrived 2 days later and were installed with no problems at all and we are ready to head out on our first trip of this year. Thanks etrailer. 614717
by:
Brent
07/10/2021
I got the wrong part they sent me ra number and got the right super hitch shipped right away. Great customer service and would do it again because the have the best products. 1089263
by:
Tim
07/19/2024
Got a 2003 Chevy 3/4 ton with a Palomino slide in and the Torklift products hold it all together. GREAT PRODUCTS 3178626
by:
Coronel
07/09/2021
These are hands down the best way to do tie downs in a truck camper. Nothing beats security of going down the road knowing you can trust your gear!1088450
by:
Brian
05/24/2021
We never give reviews but we had the best experience from start to finish. Ordering was easy, customer service was awesome which you rarely find anymore, we received it sooner than we thought we would and it was the best price that we found.... Thank you etrailer.com 1045901
by:
Dan
07/24/2015
Torklift was recommended by several dealers and services departments not to mention the reviews on the web. So we gave it a try being new to the RV scene. Instructions were great, called Torklift customer support twice and they were right on in their instructions. Was successful in installing myself, took a couple hours, next time, way sooner. Will recommend to friends and family. 214200
by:
Mark A.
05/20/2019
See my SuperHitch 20K original review. Great products and eTrailer is the best to order from 644206
by:
Neil
08/25/2024
Easy to install. Very strong and love the idea the mounts are hidden when not in use. Had bedrail tie downs before then upgraded to forklift. Etrailer was there with excellent customer care/support. Above and beyond. Will definitely use etrailer for any future needs. 3199894
by:
Chris
06/03/2019
Although expensive, the quality can't be beaten. Installation is straight forward and simple. The only thing I will be doing on my own is adding an additional hole in each of the brackets that insert into the tube. This will allow me to recess the bracket all the way in and secure it. 652821
by:
Jake
09/27/2021
This are built well and very stout. They are a bit sloppy once slid inside the the super hitch and may end up rattling. Install on the super hitch is 2 bolts and bam..youre done. These are overpriced IMO. 1164311
by:
Jeff A
05/09/2017
There are no problems with this item. It was shipped with two other small items that had a good chance of being damaged since this item is so heavy. I highly recommend that etrailer package small items separately. 378167
by:
Carter
06/10/2024
Great service, Madison pointed me in the right direction and helped me order the tie down I needed! Very fast shipping. The tie down fit great as well. 3156144
by:
Cindy
03/17/2017
Fast shipping. Good price. Easy installation. 354994
Hey Carl, we sure do and welcome back! Since your 2004 Dodge Ram 2500 has the TorkLift SuperHitch Original Trailer Hitch item # TLD1102, you'll need the TorkLift Camper Tie-Downs item # TLR3503. These will bolt directly to your hitch.
If you have any additional questions, go ahead and click on the box below that says Reply to Jerred H and I'll be happy to answer them. view full answer...
The TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 24" Long # TLE1524 utilizes the 2 inch double receiver. For your 2008 GMC Sierra 3500 you will use # TLC1205. view full answer...
Hey John, thanks for reaching out!
For just the rear set of TorkLift tie-downs you need the TorkLift Camper Tie-Downs # TLR3503, which I see you recently purchased for your 2006 Dodge Ram.
Just out of curiosity, why aren't you needing the front set as well? view full answer...
There are 2 different options for your 1996 Ford F-350 8' Bed with running boards and they just depend on what kind of trailer hitch you have installed on your pickup.
The correct front mount tie-downs are in the part # TLF2000. If you have the Torklift SuperHitch part # TLF1000 installed then the correct rear tie-downs are in the part # TLR3503. For any other aftermarket hitch (or none at all) then the correct rear tie-downs are in the part # TLR3501. These are compatible with the dual... view full answer...
The Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches part # BWGNRK1062-5W for the 2006 GMC Sierra 3500 needs replacement pin handle part # BW1900-2-2007. If your actual pin is bent on the underside of the center section near the ball hole, you will need to replace the center section with part # BWGNRC962. The actual pin on the center section near the ball hole is not replaceable as a single part. I have attached an photo of that part. The replacement pin handle... view full answer...
I recommend the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1102-30. To install a 2-1/2" class 5 hitch on your 2005 Dodge Ram 3500 you will have to utilize a new set of rear tie downs as well. The TorkLift hitch will allow you a bolt on installation with no drilling required.
The TorkLift Custom Frame-Mounted Camper Tie-Downs # TLR3503 will bolt onto your new hitch since your TorkLift # TLD3109 will no longer fit your truck. view full answer...
Yes. The TorkLift SuperHitch is the only brand that accepts the custom fram mounted camper tie downs. For your 1997 Ford F-250, the hitch receiver you would need is the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers # TLF1000. You would not need to modify your exhaust or move your spare, you would only need to temporarily move for installation. The only 21 inch extension that will not reduce a hitch capacity by 50% is the TorkLift SuperTruss... view full answer...
The current Torklift tie down part # TLD3101 that you have installed on your 1997 Dodge Ram 3500 only fits if you have the factory hitch. If you go with the SuperHitch part # TLD1100 you would need to change your rear tie down to the part # TLR3503. view full answer...
I'm happy to inform you that the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear, part # TLR3503, that you referenced is a perfect match for your 2012 Ford F-350 Super Duty with a 6-3/4 Foot Bed - without board or step underneath truck bed and with a Torklift SuperHitch Original 20K, part # TLF1002-30.
Of course, this piece is only half of the equation since they are the rear tie downs. To complete the setup, you will need the corresponding front tie downs. They are the TorkLift... view full answer...
According to my Torklift contact, the # TLR3503 rear tire downs you mentioned are indeed the correct tie downs for your 2003 Ford F350 with 8 foot bed. view full answer...
In order to add a set of front and rear frame mounted camper tie downs to your 2016 Ford F-250, I would need to know the bed size, running board/bed step option, and trailer hitch type.
For the front of your truck you will want to use the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF2012 for 6-3/4' bed or part # TLF2016 for 8' beds.
For the rear of your truck you will want to use the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF3006 if you have the factory trailer... view full answer...
For your 2008 Dodge Ram 3500 long bed with a Torklift Hitch part # TLD1102-30 the correct set of Torklift Camper Tie Downs are the # TLD2101 for the front and the part # TLR3503 for the rear.
I attached an install video for these for you to check out as well. view full answer...
I have a solution for you, but the TorkLift # TLD3109 are not compatible with with the SuperHitch # TLD1102 since the new SuperHitch's side plates are going to occupy the same spot where those old tie downs were previously installed. For this reason you'll need to use the TorkLift Rear Tie Downs # TLR3503 as a replacement. These tie downs are a confirmed fit on your 2006 Ram 2500 Quad cab and will bolt directly to your new SuperHitch.
I've linked some installation and review videos of... view full answer...
I have a solution for you that will work great with the TorkLift SuperHitch Original Trailer Hitch Receiver item # TLD1100 you referenced but we do not have any spacers. Instead, you will want the TorkLift Custom Frame-Mounted Camper Tie-Downs item # TLR3503. These tie-downs insert inside TorkLift hitches frame mounted brackets. They secure your camper to your truck's base instead of its bed, which better distributes weight to keep setup from being too top-heavy.
The TorkLift SuperHitch... view full answer...
No, the B&W trailer hitch # BWHDRH25198 is not compatible with the Torklift camper tie downs. The rear tie downs are only compatible with the Torklift super hitch because it has a 3-1/2" square crosstube. The crosstube on the B&W hitch is more like 2-1/2".
For a 1997 Ford F-250 and 350 we do have the Torklift super hitch # TLF1000. This will fit as long as you do not have the 10" deep drop bumper. This will go with the rear tie down # TLR3503. I know the Torklift hitch is quite a bit... view full answer...
The Brophy tie downs # HSAB should only be mounted to make contact with the metal of the bed so I would not recommend them for your 2002 Ford F-250 unless you can remove those caps. Since you are trading in the camper for perhaps another camper the best solution is to use custom fit frame mounted camper tie downs.
There are a few options depending on how your truck is configured. I have linked the main page for your truck. For example if you have an 8 foot bed without any board or step... view full answer...
The Torklift # TLD41000 are designed to clear running boards, so they'd be the correct front tie-downs for you.
The rear tie downs you'll need will depend on which hitch is currently on your truck. For a OEM hitch that has an open ended crossbar, use # TLD3101. If you have an aftermarket hitch not manufactured by Torklift that has a side plate that measures at least 4 x 4 inches, use part # TLR3500. If the truck has a Torklift SuperHitch, use # TLR3503.
If you'll be needing Turnbuckles,... view full answer...
For your 2015 Ford F-350 Dual Rear Wheel there are a few options depending on if you have the factory installed trailer hitch receiver, or an aftermarket trailer hitch receiver.
If you have a factory installed trailer hitch receiver you will need the TorkLift Front Custom Frame-Mounted Camper Tie-Downs # TLF2016 and Rear # TLF3006.
If you have an aftermarket trailer hitch receiver that is not made by TorkLift you will need the TorkLift Front Custom Frame-Mounted Camper Tie-Downs # TLF2016... view full answer...
Hey Jason,
The TorkLift Camper Tie-Downs # TLR3503 would be a compatible fit with the TorkLift SuperHitch Original Trailer Hitch Receiver # TLD1101 and would actually mount to the four bolt holes in the frame brackets of the hitch that are around where the cross-member slots through.
If you don't have running boards or they at least stop at the end of the cab then you can use the TorkLift Camper Tie-Downs # TLD2102. If you have running boards that extend under the bed then you'll need... view full answer...
The correct set of frame mounted tie downs that will fit your 2005 Dodge Ram 3500 with the TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLD1108-30 is the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLD2101 if you have running boards/nerf bars or part # TLD4101 if you do not have running boards/nerf bars for the front and the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLR3503 for the rear.
Unfortunately, we do not have any replacement parts for the frame... view full answer...
It looks like the TorkLift tie downs for your old 2004 GMC Sierra 2500 long bed were # TLC2204 for the front and # TLR3503, # TLR3504, # TLC3206, or # TLR3501 for the rear.
The 2015 GMC Sierra 3500 Crew Cab long bed uses # TLC2220A for the front and # TLC3212A for the rear if it is without board or step underneath truck bed and with a factory installed hitch or TorkLift SuperHitch or without a hitch or # TLC2219 and # TLR3500 if it is without board or step underneath truck bed and with... view full answer...
They are not compatible, I verified with TorkLift there are different rear tie-downs for your 2003 Ram 3500 long bed for the factory hitch and the TorkLift SuperHitch Original Trailer Hitch Receiver # TLD1102.
The correct fit for your truck and the SuperHitch Original # TLD1102 are the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLR3503. view full answer...
The correct Torklift Rear Camper Tie Down you need is the part # TLR3503 for your 2007 Ford F-350 with a Torklift Superhitch Original hitch installed. view full answer...
The TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLR3503 are the ones you want. They are designed for your 2008 GMC Sierra 3500 and will work with the TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLC1205-30. The part # TLR3504 are for some of the Ford models. view full answer...
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tim
4/16/2015
Hi Scott,hey how big is the flange that bolts on to your hitch?