Is Aluminum Liger Trailer Wheel LH49FR Compatible With Ford OEM TPMS Sensors?

Question

Question:

Thinking about purchasing these wheels for our TT based on an answer to the question below. Looking to install the Ford TPMS kit for our TT. Ford states the following regarding the TPMS Sensors: sensors only fit wheels with J-type flange wider then 3.5in and a0.452in valve stem hole. Are these wheels compatible with the Ford TPMS sensors? Thanks in advance.

asked by: John K

0

Expert Reply:

Hey John, thanks for reaching out. We have been getting this question a lot recently about the Ford TPMS sensors. I went out to our warehouse and measured the valve stem hole on the Aluminum Liger Trailer Wheel # LH49FR. I can confirm that it uses the 0.452 valve stems so this will be compatible with the Ford TPMS sensors.

expert reply by: Jesse M

0

John K.

1/9/2025

Thanks for the quick response.. I don't know what the J-type flange means but I'll gamble for didn't use something that would fit a limited number of TT wheels. But then again it is Ford.

Jesse M.

1/9/2025

@JohnK Im gonna be honest John, I am not 100% sure what they mean by J-flange. Not a term I am familiar with but I think they are referring to the shape of the bead seat and I think that J-flange style of wheel just indicates a tubeless tire and wheel which the # LH59VR are. In the past it seems like Ford just doesn't want you to use their sensors on oversized wheels/tires with higher PSI ratings which is why they say only to use with the smaller size valve stem. Pretty typical ford nonsense lol. Let me know if there is anything else you need.

John K.

1/9/2025

@JesseM No other questions and thanks for the quick reply.

Answer 1

Easiest way will be to use the winch plate mount part #BDW20291 that you mentioned but attach it to the floor of the trailer at the very front to a crossmember of the frame. To mount in the V area of the A-frame is possible but it would require quite…

view full answer...

Answer 2

Not all aluminum trailer frames are strong enough for use with a steel weight distribution (WD) system. It is possible that the stronger steel WD components could put too much stress on the frame. If your trailer has an aluminum frame you'll…

view full answer...

Answer 3

You do have a very interesting situation. When it comes to aluminum trailers we always defer to the manufacturer whether it is just a utility trailer or an RV trailer like your toy hauler. Aluminum frames can't always withstand the pressure of a…

view full answer...

Answer 4

Hello John, thanks for reaching out. We do carry parts for the Equalizer weight distribution hitches, and we actually have exactly the part you are looking for. What you will need is the Inner Link Plate #EQ90-02-5210 and outer link plate…

view full answer...

Answer 5

Hi again, Shawn! Trailer wheels typically do not have psi ratings as that refers more to the tire and valve stem. With the Lionshead Liger #LH49FR having a rubber valve stem like the #AM20907, it is currently rated to 100 psi and under. If you wanted…

view full answer...

Answer 6

Thank you for providing the picture of the wheel design and the size information. To replace your ST205/ 75R15 wheel we have the Aluminum Liger Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2 - Glossy Black #LH34FR. This 15" x 5"…

view full answer...

Answer 7

Hello Alex, thanks for reaching out. The Goodyear Endurance ST235/85R16 Radial Tire w/ 16" Margay Aluminum Wheel #LH35VR is balanced high side to low side, but they are not spin balanced like car tires. Having them spin balanced is not required,…

view full answer...

Answer 8

I reached out to my contact at TST and confirmed that the TST TPMS - Color Display - Signal Booster - 6 Internal Tire Sensors #TST-507-INT-6-C you were looking at will work perfectly fine with the Counteract Balancing beads you use in your tires.…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Is Aluminum Liger Trailer Wheel LH49FR Compatible With Ford OEM TPMS Sensors?

Product Page this Question was Asked From

Continue Researching