Heavy Duty Sway Control 2-Ball Platform For BulletProof Hitches Ball Mount Needed

Question

Question:

Looking at sway control 2 ball platform 36k for my bullet proof hitch but no dimensions are shown. Are they same as medium duty ?

asked by: Emilio C

1

Helpful Expert Reply:

Hey Emilio,

The channels for Bulletproof Hitches ball mounts are 3" wide and so is the Sway Control 2-Ball Platform for BulletProof Hitches Ball Mount # BPH76RR. This is limited to 10,000lbs when used with 2" ball or 14,000lbs when used with 2-5/16" ball and would be their medium duty mount.

Since you have the 36k ball mount you'll want the heavy duty version # 358SWAYCONTROLBALL, which has a 12,000lb/36,000lb capacity.

expert reply by: Kevin C

1

BPH76RR Dimensions
(click to enlarge)

Heather A.

11/17/2025

Hey Emilio, how did the heavy-duty sway control platform end up working with your 36K BulletProof hitch? Knowing how it fit and performed could help others trying to match the right setup for their hitch size.

Answer 1

Derek, great question, and you're definitely not alone in wondering this. The good news is, there’s no special programming required for the #LC73PX brake assemblies. They’re electric drum brakes, so they wire up just like any standard setup: one…

view full answer...

Answer 2

Hey Richard, so yes you can use tow friction sway control units with the Sway Contol Platform part #BPH76RR. Typically the recommendation is that if the trailer weighs up to 6,000 lbs a single unit is fine but if between 6k and 10k you'll want a…

view full answer...

Answer 3

Hello again Colton; the Curt Rebellion XD #C83WR is not compatible with any weight distribution hitch. Since the Shocker Hitch models don't have enough of a drop for your setup the only solution is going to be the Gen-Y. I don't know of any…

view full answer...

Answer 4

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount part #C45949-2516 is an excellent option for towing as it has built-in cushioning which does a great job of absorbing road shock thereby proving a smoother ride. In regards to weight…

view full answer...

Answer 5

Hey Dewain, we actually have a lock set specifically designed for use with the Bulletproof adjustable ball mount part #BPH77MR with the part #34061674-D. This comes with two locks for the platform of the ball mount and an additional lock for the…

view full answer...

Answer 6

Hi John! The etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches - Vinyl Coated Steel #e99007 could be used with weight distribution, but I don't think it's the one I would go for. It works really well for things like bike racks, cargo…

view full answer...

Answer 7

Hey Jonathan, We haven't heard of any issues with the P3 #90195 and plug-in harness #3070-P with a 2024 Honda Ridgeline. How are you sure that the brakes are being applied on your Honda when applying the manual override on the P3? What are you…

view full answer...

Answer 8

The Curt shank part #C17100 that you referenced might be slightly different from what came on your system, but it's the same in the areas that matter. The vertical portion of the shank and the mounting holes are the same size so the head of your…

view full answer...

Answer 9

Sounds like you are looking for the mount for the small ball of your friction sway control unit. You have a couple options like the part #D320 which is a ball mount that has the mounting tab attached to the side of the ball mount platform. We have…

view full answer...

Answer 10

Hey David, it sounds like you know what you're doing but I've also gone ahead and found the wiring diagram for the Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR for you to check out so you can use it as a cross…

view full answer...

Answer 11

We have exactly what you need for a weight distribution hitch for your Jayco Jay Flight, which according to my research has a GVWR of 9,000 lbs. Based on that, because the ideal system would be one in which your loaded tongue weight falls somewhere…

view full answer...

Answer 12

We have something similar that is also custom fit. It is the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles item #HM56200. This plugs into your Jeep's existing wiring and gives you a 4-way harness that can be used for flat towing. I have…

view full answer...

Heavy Duty Sway Control 2-Ball Platform For BulletProof Hitches Ball Mount Needed

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching