Can the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount be Used with Weight Distribution

Question

Question:

im making a trip to california 1200 mile trip one way. i will be pulling 13-ft. trailer, with kukota tractor 0n flat bed trailer. wanting to use curt rebellion xd shock absoring adjustable ball mount w/ 2 5/16ball 15k. Question: wont I need weight distribution system.

asked by: Dancel,jr

1

Helpful Expert Reply:

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount part # C45949-2516 is an excellent option for towing as it has built-in cushioning which does a great job of absorbing road shock thereby proving a smoother ride.

In regards to weight distribution, this ball mount is not compatible. In regards to whether or not a system should be used, this really comes down to how well the truck can handle the trailer. We recommend using one if the weight of the trailer (while loaded) is more than half that of the truck. If so, a system like the Curt TruTrack Weight Distribution System part # C17500 would be wise.

expert reply by: Conner L

1

Cris J.

6/16/2020

i have dual axle tandam axle 13' ft. trailer i would want inspect trailer electric drum brakes. tell me what signs should i watch for ,etc. trailer has been seating number years.

Chris R.

6/20/2020

Look for rust/corrosion on the drums, frayed wiring, worn down brake shoes, etc. If you haven't actually taken the trailer out pull it to a nearby empty parking lot and just test out the braking. You'll know pretty quickly if there's an issue.

Answer 1

Hello Sandy, thanks for reaching out. We do have cargo carrier options that can go offroad. For that you will just want to avoid any of the folding carriers, since the folding portion would be a weak point. A fixed carrier will be much better for…

view full answer...

Answer 2

For your 2021 Forest River 2883WS I would recommend a hitch mounted cargo carrier over a bumper cargo carrier, as Forrest River does not recommend mounting anything the the bumper although people have done it in the past with no issues. Because of…

view full answer...

Answer 3

I do have a solution for you but our contacts over at Pro Series have recently told us that the cargo carriers they manufacture, including #63153, are not rated for use behind a 5th wheel trailer. Curt has carriers that can be used on the back of a…

view full answer...

Answer 4

The 20x47 Reese Cargo Carrier part #63155 has a fixed shank so there won't be any reason that you couldn't use it on the rear of your travel trailer. If it had a folding shank then there would be issues as the added movement from any…

view full answer...

Answer 5

Hey Emilio, The channels for Bulletproof Hitches ball mounts are 3" wide and so is the Sway Control 2-Ball Platform for BulletProof Hitches Ball Mount #BPH76RR. This is limited to 10,000lbs when used with 2" ball or 14,000lbs when used with…

view full answer...

Answer 6

Hello again Colton; the Curt Rebellion XD #C83WR is not compatible with any weight distribution hitch. Since the Shocker Hitch models don't have enough of a drop for your setup the only solution is going to be the Gen-Y. I don't know of any…

view full answer...

Answer 7

Hey Richard, so yes you can use tow friction sway control units with the Sway Contol Platform part #BPH76RR. Typically the recommendation is that if the trailer weighs up to 6,000 lbs a single unit is fine but if between 6k and 10k you'll want a…

view full answer...

Answer 8

Derek, great question, and you're definitely not alone in wondering this. The good news is, there’s no special programming required for the #LC73PX brake assemblies. They’re electric drum brakes, so they wire up just like any standard setup: one…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Can the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount be Used with Weight Distribution

Products Featured in This Question

Continue Researching