Weight of Torklift Camper Tie Downs TLD2140 and TLD3112

Question

Question:

what is the weight of the D2140 and D3112 tie downs

asked by: Simon

0

Expert Reply:

Hey Simon, the part # TLD3112 weighs 37 lbs and the part # TLD2140 weighs 49 lbs.

expert reply by: Jameson C

0

Jameson C.

11/17/2025

Hey Simon, did those weight details for the front and rear TorkLift tie-downs help with your setup? Knowing how they balanced out could help others planning a similar camper load.

Reply

Answer 1

Hello Ken, thanks for reaching out. Sounds like you are on the right track here because the type of running boards on your truck do dictate which tie downs to use. You are also correct that you will not be able to use the tie downs from your old 2002…

view full answer...

Answer 2

Hey Brian, thanks for reaching out. We do offer TorkLift frame mounter camper tie downs for your 2024 Ram 3500 6.4' bed with cab length steps. You will need the following: - TorkLift Camper Tie-Downs - Custom Frame Mount - Front #TLD2141…

view full answer...

Answer 3

Hi Steve; thank you for providing all of that information. For the front you need the #TLD2140 and for the rear the #TLD3112.

view full answer...

Answer 4

With the Magnetek 6700 series power centers being obsolete your best option is to replace it with one like the Progressive Dynamics 4100 Series RV Converter #PD4135K.

view full answer...

Answer 5

The correct Torklift Camper Tie Downs for your 2022 Ram 3500 would be the part #TLD2141 and #TLR3510 which is also correct for use with the Torklift 30k hitch that fits your truck part #TLD1111-30. Since you have a dually you will also need to…

view full answer...

Answer 6

Hey Robert, I did some checking and the correct front Torklift tie downs for your 2019 Ram 2500 are the part #TLD2140. The #TLD2142 does also fit your truck. The reason it is also an option is that it was made to accommodate other vehicle…

view full answer...

Answer 7

For a 2022 Ram 2500 with a 6.5' bed you'll need the TorkLift Camper Tie-Downs #TLD3113 for the rear. For the front you'll need part #TLD2140 if you have no running boards or running boards that end before your bed. If you have running…

view full answer...

Answer 8

Hey Tom, With those Magnetek 6700 Series no longer being around I recommend the Progressive Dynamics #PD4045KA. This is an upgrade since we no longer carry any 30-35amp units, this will upgrade you to 45 amps of output. You will need to modify the…

view full answer...

Answer 9

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

view full answer...

Answer 10

Hey John, congrats on the new truck. Yes, the Brophy Slide In Camper Tie-Downs - Extra Clearance item #HSAB can be used with your 2026 Ram 3500 dually. What turnbuckles did you use previously with your 2021 Lance 865?

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Weight of Torklift Camper Tie Downs TLD2140 and TLD3112

Product Page this Question was Asked From

Continue Researching