Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This 16" x 6" steel wheel is made for serious towing strength. Rated up to 3,750 lbs and meeting Department of Transportation standards, it’s built for the kind of weight and pressure that comes with loaded trailers. The stout rim fits both 1/2"-20 and 9/16"-18 studs for versatility, giving you solid compatibility without compromising stability or safety on the road.
Moisture, road salt, and grime won’t take this wheel down easily. The Dexstar uses an e-coat primer under a durable white powder coat finish that seals out rust and corrosion. It holds up to repeated dunking and long-term outdoor exposure, keeping its finish cleaner and brighter through the seasons.
A zero offset design means the load sits evenly across the hub face—ideal for steady tracking and reduced stress during long hauls. That balance is paired with a backspacing of 3-1/2", giving good clearance while keeping handling predictable when fully loaded. It’s a simple detail that translates into smoother towing over time.
The common 8 on 6-1/2 pattern makes pairing this wheel with most trailer hubs straightforward. A 4.9" pilot diameter centers it precisely, while non-threaded lug holes ensure even torque whether you’re using 1/2" or 9/16" hardware. Designed for easy matching, it takes the guesswork out of finding a reliable replacement or spare wheel.


1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Dexstar 16 inch by six inch white spoke steel trailer wheel with the eight on 6 1/2 inch bolt pattern. Now this is a nice sturdy steel construction. Gives you excellent corrosion resistance 'cause it uses a white powder coat finish over an e-coat primer. This is an eight spoke pattern design and it is a high quality wheel that will meet the DOT, Department of Transportation specifications. This wheel is made by Dexstar, which means it is made in the USA.
A few specs on this. We're gonna measure the diameter, and the diameter when you measure it, is always measured inside to inside. You don't wanna measure outside to outside. It's inside to inside. So you can see if we put a ruler on that and go straight across.
There's your 16 inch diameter and the width is the same way. You're gonna measure where the tire bead seats, so it's inside to inside. So there's your six inches wide. Now the bolt pattern on this, it is an eight on 6 1/2 inch bolt pattern. And if you wanna measure that on a wheel it's an even number of lugs, like in this case, eight.
It's pretty easy because all you have to do is measure straight across. The lug holes are lined up straight across from each other. So just pick any hole. Let's say this one. Measure from the center of this hole directly across to the center of the one right across from it.
And on this it'll measure 6 1/2 inches. So that's an eight lug 6 1/2 inch bolt pattern. Pilot hole diameter, which is the large hole here in the center of the wheel, diameter of this opening is 4.9 inches. And this will fit the wheel stud size of a 1/2 inch by 20 or 9/16 by 18. Last thing is the capacity on this wheel is 3,750 pounds. But that should do it for the review on this Dexstar 16 inch by six inch white spoke steel trailer wheel with the eight on 6 1/2 inch bolt pattern.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews

Steve S.
8/12/2014
The wheels are still doing great and Im still just as satisfied as I was when I bought them. The paint looks like its holding up good. Thanks Steve

Vicki
9/30/2022
The wheels are still working fine.Great product!

Heinrocket
12/8/2015
It has been great

Larry H.
5/21/2015
The wheel is a spare for my car trailer and luckily I havent needed to use it yet.I have mounted a tire on it and it goes every where the trailer goes.Thanks for the great service.

Garland
6/15/2019
Great product. Rims are true and straight. White paint still look good.

W. M.
9/22/2020
Still working out just fine a year later.
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.











Claire H.
10/14/2026
We appreciate your continued support and for trusting us to help get you the parts you need to continue on your journey :)