Are 15" Wheels With A 5 on 5.5 Bolt Pattern Available
Updated 11/17/2025 | Published 12/05/2024
Products Featured in This Question
Question:
I have old trailer with 14.5 tires and want to go to 15 . This will only be used on farm not for road service. 5 hole 5.5 spacing with a 3.75 center hole. Do you have such a rim? I will need 2 rims . Thanks Don
asked by: Don D
Expert Reply:
Hey Don,
We unfortunately don't offer any 15 wheels with a 5 on 5.5 bolt pattern. The 5 on 5.5 pattern was pretty common back in the day when people would use their truck tires/wheels for their trailers. We do offer 5 on 5 and 6 on 5.5 bolt patterns that I could potentially find hubs for depending on what bearings and seals fit your spindle. If you can't find two of these wheels somewhere else and end up having to replace the hubs to get a more common wheel bolt pattern then let me know what your spindle measures at points B, C, and D from the diagram below and the capacity of the axle. You'll need to use a caliper like part # PTW80157 to get a precise measurement because the bearings and seals are an exact fit. If you don't know the capacity I'll take the diameter of the axle tube.
(click to enlarge)
Product Page this Question was Asked From
Dexstar Steel Spoke Trailer Wheel - 15" x 5" Rim - 5 on 5 - White Powder Coat
- Trailer Tires and Wheels
- Wheel Only
- 15 Inch
- 5 on 5 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Continue Researching
- Video: Trailer Idler Hub Assembly for 3,500-lb Axles Feature Review
- Video: Review of the Trailer Idler Hub Assembly for 3,500-lb Axles
- Search Results: 5 on 5~1/2 inch trailer tires and wheels
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5-1/2 - Pre-Greased
- Shop: Steel Solid Center Trailer Wheel - 9" x 4" Rim - 5 on 4-1/2 - White
- Q&A: I Need a Trailer Wheel with a 5 on 5.5" Bolt Pattern What is Available
- Shop: Steel Solid Center Trailer Wheel - 10" x 6" Rim - 5 on 5-1/2 - White
- Shop: Steel Solid Center Trailer Wheel - 9" x 4" Rim - 4 on 4 - White
- Shop: Kenda Loadstar K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range B
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Recommended Replacement Wheels for 5 on 5 Bolt Pattern
- Q&A: Looking For 15" Trailer Wheel With 5 on 4-3/4" Bolt Pattern
- Article: Trailer Tire Sizing
- Q&A: Looking For Caliper To Replace Discontinued Tie Down Engineering 46802 Caliper
- Article: Printable Trailer Bolt Hole Pattern Template
- Q&A: What is the Bolt Pattern for Dexstar 15x5JJ Trailer Wheel 17-384
- Q&A: Replacement Trailer Wheels With 5 On 5" Bolt Pattern For PJ Utility Trailer
- Q&A: What Is The Difference Between A 15X5 And A 15X6 Tire
- Article: Trailer Wiring Diagrams
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How To Read A Tire Sidewall
Chris R.
11/17/2025
Hey Don, did you get a chance to measure your spindle and axle so we can see what hubs might fit for those 15-inch wheels? Once you have those numbers, I can help narrow down the right match. Let me know what you find.