Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you need a wheel that just works, the 9" x 4" steel construction of the Americana solid-center rim delivers. It’s rated for 1,520 lbs and uses a stout 5 on 4-1/2" bolt pattern with a 1/2"-20 wheel bolt size. The solid-center design keeps things simple and strong—no spokes or cutouts, just a dependable surface that stays true under load.
Moisture and corrosion are no match for the layered protection on this wheel. A white powder coat finish seals over an e-coat primer to keep rust off, whether you’re in humid conditions or storing outdoors. It’s a clean look that lasts through seasons of use.
Compatibility is straightforward with the common 5 on 4-1/2" bolt pattern, a 2.81" pilot diameter, and zero offset. That makes matching hubs simple when you’re setting up or replacing a wheel, so you can bolt it on and get rolling without guesswork.
This wheel meets Department of Transportation specifications, showing it’s engineered for real-world use. The durable steel core and clean finish give a solid foundation for proper tire mounting and balanced performance down the road.


1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Americana Nine Inch White Solid Center Steel Trailer Wheel with the five on four and a half inch bolt pattern. Now this is a steel wheel, has the solid center design, which is very sturdy and corrosion resistant. This wheel does use a white powdercoat finish over an e coat primer on the front and the back of the wheel. And this wheel does meet the DOT or Department of Transportation specifications. A few sizes on this. The diameter, which is nine inches, is measured inside to inside. In other words, when a tire is mounted on this wheel, the beads of the tire seat right here, so what you're measuring is bead seat to bead seat.
So if I take a tape measure here and we go bead seat to bead seat, there's your nine inch diameter. The width on it is the same way, inside to inside, bead seat to bead set. Four inches. So nine inches by four inches. Now the bolt pattern on this wheel's a five on four and a half inch bolt pattern, and if you ever want to measure that bolt pattern the way you would do it on a wheel that has an odd number of lugs, in this case five, you just pick one of the holes, let's say this one, and you measure from the center of that hole and you directly across to either one of these holes, so whichever hole you pick, you'll measure from the center of the starting hole, to the furthest edge of the hole that you measure to. On this one if we measured it, it'd be four and a half inches.
Actually, see if we can do that. It's a small wheel, so it's hard to, but it'll give you an idea. There's center for this edge right at four and a half inches. So it's a five lug, four and a half inch wheel. Now this does use a wheel lug size of a half inch by 20. The weight capacity on this wheel is 1,520 pounds.
And the last one I want to give you is the pilot hole diameter, that's the large hole here in the center of the wheel, goes over the hub on your trailer, diameter of that opening is 2.81 inches. But that should do it for the review on the Americana Nine Inch White Solid Center Steel Trailer Wheel with the five on four and a half inch bolt pattern.
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
Ratings & Reviews

Christopher
4/5/2024
They work great finally got them mounted the other day


Jenny N.
10/3/2022
Thank you for reaching out! I will have our customer service team contact you.

Brooke M.
6/11/2024
I will have our customer service team reach out to you. I am thinking the wrong wheel was sent by mistake. I am so sorry!
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Gary L.
8/21/2022
It continues to be an excellent product trouble-free