Correct MORryde X-Factor Crossmember For CRE 3000
Updated 12/15/2025 | Published 11/17/2024
Products Featured in This Question
Question:
What information do I need to have prior to getting help ing the correct X-Factor? I know that the current suspension installed is the CRE 3000.
asked by: Houston D
Expert Reply:
Hello Houston; since you have the CRE 3000 the correct MORryde X-Factor Crossmember is the # MR33WR. To make sure it will fit you can measure between your hangers. The crossmember has an adjustable length of 61" - 79-1/2". The other thing I would do is make sure nothing sits in the way of where you're running the crossmember. You may need the drop down brackets # MR43WR if you need the crossmember to run under pipes or anything else you don't want to have to move for installation.
Product Page this Question was Asked From
MORryde X-Factor Crossmember for Standard Frame Hangers
- Accessories and Parts
- Trailer Suspension Parts
- Crossmember
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Which MORryde X-Factor Can be Used with CRE3000 MORryde Equalizer Kit 2022 Grand Design Imagine
- Q&A: Lookiing To Upgrade Axles On 2015 Keystone Cougar 33RBK
- Q&A: What MORryde X-Factor Crossmember do I Need for My 2022 Grand Design Reflection 31mb 5th Wheel?
- Q&A: Which Hangers Should MORryde X-Factor Crossmembers Install On
- Q&A: Can MORryde X-Factor and Roadmaster Comfort Ride Systems be Installed Together?
- Q&A: Will MORryde X-Factor Crossmember Work With AllTrek 4000
- Q&A: What is Needed to Install 8k Roadmaster Comfort Ride System on 7k 3 inch Axles
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Article: Double-Eye Trailer Suspension System Review
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Stability Control for Heavy Duty Vehicles
Robin H.
12/15/2025
Hey Houston, how did things go with the MORryde X-Factor Crossmember for your CRE 3000 setup? Were the measurements and clearance checks enough to get it fitted right? Your update could make it easier for the next person working on the same suspension.