MORryde Wet Bolts and Crossmembers Compatible With ALLTREK 4000 Tandem Axle Trailer Equalizers
Published 12/16/2023
Products Featured in This Question
Question:
Which moryde crossmember and wet bolt kit do I use with this item?
asked by: Josh T
Expert Reply:
With the MORryde ALLTREK 4000 # MR89DR you will need to select one of the wet bolt kits from the list below depending on what your trailer currently has. The lengths are measured from center of shackle mounting hole to center of mounting hole.
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" # MR46ZR
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" # MR76ZR
MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" # MR58ZR
MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 3-1/8" # MR98ZR
You will most likely use the MORryde X-Factor Crossmember for Standard Frame Hangers # MR33WR as that is the most commonly found style. We also have the Drop Down Adapter # MR43WR should you have a sewer line or other part in the way. If you can send me an image of your suspension I can help determine that these are the correct parts and if you will need the drop down adapter.
Product Page this Question was Asked From
MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 6-1/2 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: double eye springs trailer leaf springs
- Search Results: alltrek 4000
- Search Results: trailer suspension parts
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Search Results: trailer leaf springs
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 25-1/4" Long
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Shop: 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long
- Search Results: morryde cre 3000
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Search Results: suspension enhancement
- Video: MORryde X-Factor Crossmember Installation - 2020 Grand Design Momentum 5W Toy Hauler
- Video: Review of TruRyde Trailer Leaf Springs - Double Eye Springs - TRU52FR
- Search Results: 25~1/4 inch long trailer leaf springs
- Q&A: Troubleshooting Lower Suspension Height On a 371 Fuzion 5TH Wheel Toy Hauler With MORryde CRE3000
- Q&A: What Axle Capacity Leaf Spring for 2018 Jayco Seismic 4212
- Shop: 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long
- Video: Review of Lippert Components Camper Jack - LC74FR
- Video: Review of etrailer 7 Leaf Double Eye Spring - e89FV
- Q&A: What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
- Shop: Fifth Wheel Hitch
- Video: Review of Lippert Camper Jacks - Replacement Controller - LC28BX
- Video: Review of Lippert Replacement OneControl Advantage Controller Level Up RV Leveling Systems - LC88TF
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Suspension Enhancement
- Q&A: Solution for Needing Replacement Controller for Lippert Level Up System
- Q&A: Comparing MORryde AllTrek and SRE4000 Premium Rubber Suspension Equalizers
on Trailer Suspension Parts
