Search: morryde xfactor   >  

Hey John, To determine the correct replacement leaf springs for your trailer you'll want to jack up one side to take the pressure off the leaf springs and then can measure from the center of one eyelet to the center of the other eyelet.…

I can certainly point you in the right direction. Now, we are not able to look up a year make and model of RV in order to know your equalizer size or shackle size. The first thing you will need to do is measure the size of the current equalizer.…

According to our contact at MORryde, the MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR works with the Road Armor cushioned equalizers so this would be what you'd want.

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

There's not many differences between the Air Lift WirelessONE item #AL25980EZ and item #AL25980. The main difference is that the item #AL25980EZ has a slightly higher CFM at 1.03 compared to 0.92 and it runs slightly more efficient at 9% over 15%…

The Road Armor Shock Absorbing Equalizer Kit part #LC696740 are taller than most other standard equalizers so you'll likely need the longer 3-1/8" shackle straps when using them, the Lippert AP Kit part #LC52SV is a go-to for this as it has…

We don't carry Dexter leaf springs, but we do offer the 4,500, 26 inch long center eye to center eye equivalent as part #e27SR.

So both of the leaf springs you mentioned are 25-1/4 inches in length from spring eye to spring eye according to Dexter. The closest option for a 4,000 lb axle spring we have would be the part #e57SR which is for a 4,000 lb axle.

Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.

The MORryde X-Factor Crossmember #MR33WR is compatible with the Equa-Flex #LC279687 so you will be able to use both on your trailer. You can stick with MORryde for the wet bolt kit and get their Suspension Upgrade Kit for Tandem Axle Trailers. You…

You could upgrade your axles to a higher capacity, however it isn't really recommended since it can create a rougher ride. Since you've got 3,500 lb axles I'd stick with those and upgrade your suspension with the SumoSprings Trailer…

Sounds like you have a blown grease seal on your trailer. This is a pretty common problem. To pick out a replacement grease seal you will need to measure the diameter of the spindle where the grease seal rides with a digital or dial caliper and then…