Is There A Video That Shows How To Replace An Axle
Updated 09/25/2025 | Published 09/24/2025 >
Question:
do any of your videos show install of a duel axle replacement?
asked by: Theodore M
Expert Reply:
Hello Theodore, thanks for reaching out. We do have a video that shows how to replace an axle. I have provided a link for you below. This is for the Dexter 7K axle # 8327834.
Basically, you just lift the trailer, undo the U-bolts and the axle comes right off. As long as you have a replacement axle with identical specs, the axle swap out will be very easy. Just keep in mind the U-bolts are not meant to be re-used, so you will need a new U-bolt kit for each axle.
I have also included a link to a video that shows how to measure for a replacement axle.
What kind of trailer do you have? Let me know if there is anything else I can do to help.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: morryde x~factor
- Shop: Trailer Axle Beam with Easy Grease Spindles - 95" Long - 5,200 lbs
- Article: Trailer Wiring Diagrams
- Search Results: slipper spring equalizer
- Search Results: trailer leaf springs
- Search Results: accessories and parts
- Search Results: springs
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" - 7,000 lbs
- Search Results: trailer suspension parts
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Article: How to Measure a Trailer Axle
- Shop: Trailer Axle Beam with Easy Grease Spindles - 94" Long - 7,000 lbs
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" - 7,000 lbs
- Search Results: solera slide toppers
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 8 on 6-1/2 Bolt Pattern - 94" Long - 7,000 lbs
- Video: Beginner’s Guide to Installing the Dexter Trailer Axle w/ Electric Brakes
- Article: How to Raise Your Travel Trailer Height
- Q&A: Spacing Between Hangers With Slipper Springs for 8,000 lb Axles and Hanger Kit
- Q&A: Correct MORryde X-Factor Crossmember For CRE 3000
- Q&A: Can MORryde X-Factor Crossmember Adapter Kit Be Used to Get Around Spare Tire and Black Tank
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Q&A: Can Middle X-Factor be Used with Roadmaster Comfort Ride
- Q&A: Can MORryde X-Factor Crossmembers Be Used With Roadmaster Comfort Ride System?
- Video: Measuring To Choose The Right Trailer Axle
- Video: Review of the Dexter Trailer Axle w/ Electric Brakes
- Video: Mount: Dexter Trailer Axle w/ Electric Brakes on a 1917 Ford Model T
- Video: Hands-On with the Dexter Trailer Axle w/ Electric Brakes
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: How to Charge a Dump Trailer Battery




Theodore M.
9/24/2025
I purchased the 7k kit. Did see the video of a single axle install. It did help. Just thought there might be one of a dual axle install. I can get by. Tks