Replacement 9/16 - 18 Lug Nuts That are 2" Long
Updated 04/29/2026 | Published 04/22/2026
Products Featured in This Question
Question:
Wanting to replace all the lug nuts on my 5th wheel rv with solid. The stock nuts are 9/16 - 18 and the overall length is 2”
asked by: Monte D
Expert Reply:
Hey Monte, thanks for the information! I recommend the Lionshead Trailer Wheel Lug Nut item # LHLR110. This stainless steel lug nut is sold individually. Specification wise, it's going to be an exact replacement for your current lug nuts.
The Lionshead item # LHLR110 is 2" long and fits 9/16" wheel bolts. It is a standard 60-degree coned style that has a 7/8" hex bolt head. It is compatible with aluminum and steel wheels. The item # LHLR110 will need to be torqued to 120-140 ft-lbs.
What kind of 5th wheel trailer do you have?
You can add this information, along with any other questions you have, where it says Add Comment.
(click to enlarge)
Jay
4/29/2026
I have had these for over 1.5 years. They work great and are very solid. They look very similar to the originals that I rep[laced.
Product Page this Question was Asked From
Lionshead Trailer Wheel Lug Nut - 9/16"-18 - Stainless Steel - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Golf Cart Tires and Wheels
- Trailer Tires and Wheels
- Wheel Lug Nut
- 9/16 Inch Wheel Bolt
- Hex Nut
- 7/8 Inch Outer Diameter
- 60-Degree Cone
- Stainless Steel
- Lionshead
more information >
Continue Researching
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T
- Video: MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications Review
- Video: MORryde X-Factor Crossmember Adapter Kit for OEM Correct Track Hangers Feature Review
- Shop: MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications
- Q&A: Correct MORryde X-Factor Crossmember For CRE 3000
- Q&A: MORryde Wet Bolts and Crossmembers Compatible With ALLTREK 4000 Tandem Axle Trailer Equalizers
- Q&A: Can I Install Just One MORryde X-Factor Crossmember Or Do I Need All Three?
- Q&A: Which Hangers Should MORryde X-Factor Crossmembers Install On
- Q&A: Comparing MORryde AllTrek and SRE4000 Premium Rubber Suspension Equalizers
- Q&A: Parts Needed To Install Solera Awning Fabric On Slide-Out
- Q&A: Size of Mounting Screws Solera Slide Topper Mounting Hardware
- Shop: MORryde X-Factor Crossmember Adapter Kit for OEM Correct Track Hangers
- Shop: Taskmaster Trailer Wheel Lug Nut - Chrome Plated - 9/16"-18
- Shop: Hex Screw - Self Drilling Unslotted Washer Head #8 x 1/2"
- Shop: MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers - 35" Wheelbase
Janice W.
4/26/2026
We lost a wheel and of course all the lugs so we purchased 8 of the Lionshead Lugnuts 9/16” and they fit fine & matched the other wheels. Been on a year or so now & we appreciated the good service from eTrailer !