Dimensions of the Brophy Clamp On Camper Tie-Downs TDSF

Question

Question:

Dang it. Still to wide What about the same measurement on the TDSF I would only have to modify the rear tie down to squeeze between the jacks Thanks again

asked by: Charles

1

Helpful Expert Reply:

Hey Charles! I went out to the warehouse and took a measurement of the Brophy Stake Pocket Mounted Camper Tie-Downs item # TDSF. From the vertical bar to the edge of the tie down tip is 5-1/2".

I have included a diagram below.

expert reply by: Jerred H

1

Dimensions of the Brophy Clamp On Camper Tie-Downs
(click to enlarge)

Jerred H.

12/15/2025

Hey Charles, how did that 5-1/2" measurement on the Brophy tie-downs work out for your setup? Your results could really help others trying to fit theirs between the jacks too.

Answer 1

Brophy camper tie-downs #HSAB are designed for full-size trucks but could fit your 1995 Toyota T100 if: External bed rail width does not exceed 5-1/2" There is at least 2" of space beneath lip of bed rail Truck does not have a drop-in bed…

view full answer...

Answer 2

According to CR Brophy, the TDSF camper tie-down you refer to is not compatible with GM trucks after the 1988 model year. My contact tells me that the HSSF tie downs are indeed compatible with a 2012 Silverado. If you look at the provided photo, you…

view full answer...

Answer 3

The Brophy Camper Tie Downs are not custom fitted to vehicles the same as other tie down options. For your 2006 Toyota Tacoma, I recommend the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 #HSAB. They will clamp…

view full answer...

Answer 4

The usable dimensions of the Brophy Stake Pocket Tie Down Anchor part #TL2B are 7-3/8 inches from the center of the pin hole to the plate that sits on top of the anchor, the width is 3-1/2 inches and the depth of it is 1-1/2 inches. This is designed…

view full answer...

Answer 5

I reached out to Torklift and they have never had a fit for a Toyota Tacoma because their hitches are for capacities greater than that size truck can handle. This means that the camper tie downs compatible with their hitch will not work for you due…

view full answer...

Answer 6

Sure thing! Happy to help! The Brophy Slide In Camper Tie-Downs item #HSSF measure 10-3/4" from the vertical bar to the edge of the tie down tip. I have attached a couple of diagrams below showing a few more measurements of the Brophy Camp On…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 11

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 12

Hello Josh, I completely understand where you are coming from. When you need long, equal-length turnbuckles to span about 35 inches on a 2022 F-350 with a Lance 1130, the goal is a setup that fits cleanly, installs easily, and stays secure without…

view full answer...

Dimensions of the Brophy Clamp On Camper Tie-Downs TDSF

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching