Recommended Hitch and Wiring Harness for a 2025 Mazda CX-70
Updated 12/15/2025 | Published 10/21/2024 >
Products Featured in This Question
Question:
What parts do I need to tow a small trailer with a 2025 Mazda CX-70. Thank you!
asked by: Vince M
Expert Reply:
Hey Vince congrats on the new vehicle! To tow a trailer with your 2025 Mazda CX-70 you're going to need a hitch, a wiring harness, a couple of mounting brackets, and a ball mount kit.
The best hitch for your CX-70 is going to be the Curt item # C25FV. This hitch is custom fit and bolts to your Mazda with included hardware. It is a class III hitch with a 2" receiver that has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. I really like this hitch because the entire crossbar mounts behind the rear bumper leaving only the 2" receiver exposed. This not only looks better it helps with ground clearance.
For a wiring harness, I recommend the Curt T-Connector Vehicle Wiring Harness item # C24ZV. This custom-fit T-connector plugs into your Mazda's wiring harness, which is located behind the driver's-side tail light. It will provide you with a 4-way connector that controls your trailer's lighting functions.
I recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure the 4-way connector to your hitch. This will put it in an easy to reach spot and prevent the risk of it falling onto the road.
To round out your towing setup, I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and 2" drop. It also includes a hitch pin and clip, hitch receiver lock with keys, hitch cover, and a storage case.
I have linked a couple of installation videos below so you can see how to get these parts set up. I have also attached a couple of pictures.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: CURT Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Transmission Cooler Installation - 2011 Chevrolet Suburban
- Q&A: Recommended Transmission Cooler for 2016 Dodge Durango with 3.6L V6 Engine
- Shop: Roof Rack
- Article: Rooftop Cargo Carriers
- Shop: Tire Chains
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Video: Curt Class III Trailer Hitch Complete Installation - 2025 Mazda CX-90
- Q&A: Does Installing the Curt Hitch C25FV on a 2024 Mazda CX-90 Require Cutting?
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Q&A: Difference in 2024 Mazda CX-90 Curt Trailer Wiring Harnesses
- Q&A: Installation Video For Curt Trailer Hitch Receiver # C25FV On 2024 Mazda CX-90
- Shop: EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2"
- Video: Curt T-Connector Vehicle Wiring Harness DIY Installation - 2024 Ford Bronco
- Search Results: trailer wiring
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Wiring Recommendation for a 2025 Mazda CX-70
- Video: Breaking Down the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector-C87BR
- Video: Installing the Blue Ox Trailer Hitch Receiver on a 2024 Ford Bronco
- Article: Trailer Wiring Diagrams
- Video: Feature Review Replacement Hardware Kit for Trailer Hitches
- Search Results: motorcycle carrier
- Search Results: motorcycle rack
- Q&A: Trailer Wiring Harness for 2024 Ford Bronco to Use with Blue Ox Hitch




Jerred H.
12/15/2025
Hey Vince, how did your towing setup go with the Curt hitch and wiring harness on your CX-70? Did everything fit together the way you expected? Your update could make it easier for the next person getting their Mazda ready to tow.