Does Installing the Curt Hitch C25FV on a 2024 Mazda CX-90 Require Cutting?

Question

Question:

I have a 2024 new Mazda cx90 I would like to put a hitch on it I have a 2” Kuat bicycle rack Do I have to cut anything on my bumper or does it fit right under it

asked by: Norman B

0

Expert Reply:

There is no cutting required to install the Curt Hitch item # C25FV on your 2024 Mazda CX-90. There is a small panel beneath your bumper cover that you will remove and not reinstall that will give you clearance for the 2" receiver. If you wanted to reinstall the panel you would then need to make some cuts in it so it would fit around the downtube of the hitch but this is not required.

I have linked the installation instructions below so you can see what I am talking about. It's covered in step 1.

expert reply by: Jerred H

0

Answer 1

Hey Vince congrats on the new vehicle! To tow a trailer with your 2025 Mazda CX-70 you're going to need a hitch, a wiring harness, a couple of mounting brackets, and a ball mount kit. The best hitch for your CX-70 is going to be the Curt item…

view full answer...

Answer 2

While we have not had a 2024 Mazda CX-90 PHEV in our shop with the hands free liftgate to test the exact function I can say most applications will not eliminate the use of the kick sensor. I installed our receiver on my Acura RDX which takes up a lot…

view full answer...

Answer 3

Hey Andrii; a hitch for a 2021 CX-9 is definitely not compatible with the 2024 Mazda CX-90 PHEV. For the '24 CX-90 PHEV what you need is the Curt Trailer Hitch Receiver #C25FV.

view full answer...

Answer 4

It is, yes. It can be hard to tell for sure, so I have added a photo for you showing the underside of a 2024 Mazda CX-90 with the Curt Trailer Hitch Receiver #C25FV. As you can see by that photo, the crosstube is concealed and hidden away, so only…

view full answer...

Answer 5

Yes, we do! To add a hitch to your 2024 Mazda CX-90, I recommend the Curt Trailer Hitch item #C25FV. This hitch is custom fit and bolts to your Mazda with included hardware. The Curt Hitch item #C25FV is a class III hitch with a 2" receiver. It…

view full answer...

Answer 6

The best hitch for a 2024 Mazda CX-90 is going to be the Curt item #C25FV. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 11

Thanks for supporting a local business Christopher! So long as your 2012 Chevrolet Silverado is a 1500 and you need a class IV hitch, the Curt item #14301 is going to be the best option. It has a 2" receiver with a 10,000 lbs towing capacity and…

view full answer...

Answer 12

Hello David, thanks for reaching out. Sounds like you are on the right track here. Both the Curt #C25FV (13568) and #C74MJ (13627) will fit all models of the 2024 CX-90 and this includes the PHEV plug-in hybrid model. This is actually a rare case…

view full answer...

Does Installing the Curt Hitch C25FV on a 2024 Mazda CX-90 Require Cutting?

Continue Researching