Trailer Wiring Recommendation for 2024 Hyundai Santa Fe Hybrid Limited

Question

Question:

My 2024 Santa Fe is a hybrid limited, will that use the same light kit as the non hybrid? Which kit for the 4 pin flat plug trailer?

asked by: Rick R

0

Expert Reply:

Hey Rick, the Curt trailer wiring harness part # CU94FR is a confirmed fit for your 2024 Hyundai Santa Fe Hybrid Limited and would be the best option as it's very easy to install.

expert reply by: Jameson C

0

Jameson C.

12/22/2025

Hey Rick, how did the Curt wiring harness work out on your Santa Fe Hybrid Limited? Your update could make it easier for others with the same model to find the right kit.

Answer 1

I have linked an installation video for the etrailer Trailer Hitch Receiver #e28AR which was installed on a 2021 Hyundai Santa Fe Hybrid near the bottom of the page. This is the newest hybrid we have been able to get into our shop to have a receiver…

view full answer...

Answer 2

Hey Charles, yes we do have the Curt trailer wiring harness part #C98RV that is a confirmed fit for your 2024 Hyundai Santa Fe.

view full answer...

Answer 3

Hi Steve; we don't actually have the Curt #C98RV in hand since it is a pre-order. The only information we have right now is that it will fit with the factory tow package since it plugs into the factory tow port. Sometimes this style fits without…

view full answer...

Answer 4

Hey Erica, thanks for reaching out! Since your 2026 Honda CR-V is a Hybrid we're a bit limited on the hitch options, and you'll need to get one that does require some fascia cutting. For this, I recommend the etrailer Trailer Hitch Receiver…

view full answer...

Answer 5

Hey Cody, congrats on the new SUV. I've got the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector item #C59236 that is universal so it will fit your 2026 Kia Sportage. It has to be spliced into your existing wiring but it will…

view full answer...

Answer 6

Hello Bill. The Draw-Tite Class 4 Hitch #76194 is what I recommend for the 2016 Volvo XC90. The install is a bit more on the difficult side because you do need to remove the rear bumper completely, as well as trim part of the bumper and the heat…

view full answer...

Answer 7

Hi Chris, Yes, you'll need the Curt Trailer Hitch Receiver #C37RV. This class III trailer hitch has a 4,000lb maximum towing capacity and 600lb tongue weight capacity, but you'll still want to refer to your Santa Fe's owner manual to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Aaron yes, the Hybrid and Non-Hybrid Hyundai Santa Fe's can use the same hitch. As far as wiring goes, I'm not seeing anything that is custom so you'd be limited to a universal harness #C47NR.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Trailer Wiring Recommendation for 2024 Hyundai Santa Fe Hybrid Limited

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching