Will Torklift Camper Tie Downs from 2017 Ram 2500 also Fit 2024 Ram 3500

Question

Question:

Will torklift frame mounted camper tie downs from a 2017 Dodge Ram 2500 fit on a 2024 Dodge Ram 3500?

asked by: Seán M

0

Expert Reply:

Hey Sean, there was a big enough difference between the 2018 and 2019 Ram 3500 trucks that the Torklift camper tie down fits won't work from a 2017 to a 2024 so you would need a new set like with the part # TL75FV.

expert reply by: Jameson C

0

Jameson C.

12/22/2025

Hey Sean, did the new TorkLift tie downs fit your 2024 Ram 3500 the way you needed? Knowing how the fit turned out could help others upgrading from older Ram trucks.

Answer 1

Hey Noel! The front tie-downs from the TorkLift Tie Downs #TL75FV are available separately. The TorkLift Camper Tie-Downs - Custom Frame Mount - Front #TLD2140 are what you're looking for. Make sure you don't forget to pick up turnbuckles…

view full answer...

Answer 2

Hi Steve; thank you for providing all of that information. For the front you need the #TLD2140 and for the rear the #TLD3112.

view full answer...

Answer 3

Thanks for all the info on your truck and camper Jack as that makes picking out the tie downs you need for your 2019 Ram 3500 very easy. The tie downs you need are the #TLD2140 for the front and part #TLD3112 for the rear. Since you have a dually…

view full answer...

Answer 4

The Torklift #TLA7004 Camper Anchor Relocation Kit does not require drilling into the camper or the truck. The adapter brackets would be attached to the camper by drilling holes at the location of the original anchor point, as shown in the photo…

view full answer...

Answer 5

When a camper is loaded on a pickup truck bed there will be a gap between the truck bed rails and the underside of the camper as you show in your photo. No worries there. For your camper tie-downs, it loos as though you have attached the rear ones…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 12

Hello Ken, thanks for reaching out. Sounds like you are on the right track here because the type of running boards on your truck do dictate which tie downs to use. You are also correct that you will not be able to use the tie downs from your old 2002…

view full answer...

Will Torklift Camper Tie Downs from 2017 Ram 2500 also Fit 2024 Ram 3500

Product Page this Question was Asked From

Continue Researching