Availability of Front TorkLift Tie-Downs From TL75FV For 2020 Ram 3500

Question

Question:

DO you sell the front frame mounts only for TL75FV? Have a 2020 Ram Laramie Crew Cab 8foot bed.

asked by: Noel B

0

Expert Reply:

Hey Noel! The front tie-downs from the TorkLift Tie Downs # TL75FV are available separately. The TorkLift Camper Tie-Downs - Custom Frame Mount - Front # TLD2140 are what you're looking for. Make sure you don't forget to pick up turnbuckles # TLS9529-2-LK as well.

What kind of camper do you have?

expert reply by: Robin H

0

TorkLift Camper Tie-Downs
(click to enlarge)

Answer 1

Hey Sean, there was a big enough difference between the 2018 and 2019 Ram 3500 trucks that the Torklift camper tie down fits won't work from a 2017 to a 2024 so you would need a new set like with the part #TL75FV.

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Jim welcome back. To determine if you need the TorkLift Camper Anchor Relocation Kit item #TLA7004, you'll have to take a measurement. You'll want to measure from the front bumper of your Palomino HS2902 to the center of the rear anchor…

view full answer...

Answer 8

Hello Ken, thanks for reaching out. Sounds like you are on the right track here because the type of running boards on your truck do dictate which tie downs to use. You are also correct that you will not be able to use the tie downs from your old 2002…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Answer 11

Hi Martin, For a 2024 Ram 3500 Dually without the factory air suspension system, the Firestone Ride-Rite Air Bags w/Easy Mount Compressor part #F47XV would be a great choice! Based off the weight of your fifth wheel and pin weight, using the…

view full answer...

Answer 12

Hey John, congrats on the new truck. Yes, the Brophy Slide In Camper Tie-Downs - Extra Clearance item #HSAB can be used with your 2026 Ram 3500 dually. What turnbuckles did you use previously with your 2021 Lance 865?

view full answer...

Availability of Front TorkLift Tie-Downs From TL75FV For 2020 Ram 3500

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching