Torklift Camper Tie Downs that Fit 2013 Ford F-250 Short Bed with Cab Length Running Boards

Question

Question:

I have a 2013 f250 superduty supercab with 6.75foot bed. It has cab length running boards. Looking for proper frame mounted tie downs

asked by: Ron T

0

Expert Reply:

Hey Ron, the correct Torlift Camper Frame Tie Down set is the part # TL63VV for your 2013 Ford F-250 short bed with cab length boards and an OEM hitch.

expert reply by: Jameson C

0

Jameson C.

12/22/2025

Hey Ron, how did the TorkLift frame-mounted tie downs work out on your F-250? Knowing how they fit with your cab length boards could help others with the same setup. Your update could make it easier for the next person with that truck.

Answer 1

I would be happy to! We have quite a few options for TRUE Frame Mounted Torklift camper tie downs for a 2015 Ford F-250. I have listed our entire selection below because there are several different ones depending on what model and accessories your…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hey, Ron! I've got just the rails you need! B&W Custom Installation Kit part #BWRVK2401. This kit will come with the rails, frame brackets, and all the hardware needed for the install. Since this is a custom kit you will not have to do any…

view full answer...

Answer 12

Yes, you can add the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel and Gooseneck Trailer Hitches, #RP30126, along with the optional part number #RP30138 if you want to include the Gooseneck Hitch connection; this will be the…

view full answer...

Torklift Camper Tie Downs that Fit 2013 Ford F-250 Short Bed with Cab Length Running Boards

Product Page this Question was Asked From

Continue Researching