Replacement Solar Panel Recommendation to Work with Go Power GP-PWM-30-UL Controller

Question

Question:

Hello, I am I need of a solar panel for my 2020 forest river forester class C 3011DS. My panel was stolen so I am looking for a replacement panel to hook up too the existing equipment. My solar controller is a go power go-pwm-30-ul

asked by: John

1

Helpful Expert Reply:

Hey John, thanks for reaching out!

I recommend using the Go Power Retreat Expansion Kit # 34272634 to replace your panel as it's rated for 100 watts and can be combined with multiple solar panels if you want to take full advantage of the 600 Watt rating your Go Power GP-PWM-30-UL can handle.

expert reply by: Jon G

1

John

9/19/2024

Hey Jon, so I’m going to start out with two of these panels, will these panels connect together as is or do I need to buy cables too connect them?

Jon G.

9/19/2024

@John Yes, they will connect together. It comes with wiring as well as expansion connectors for you to use too.

John

9/20/2024

@JonG Thank you Jon, I just ordered 3 panels.

Answer 1

The best Timbren kit for your 2019 Ford Transit T350 motorhome chassis is part #TFRTR350 rated for 5,600 lbs. The other kit #TFRTR350HD you referenced is rated for 8,600 lbs and designed around vehicles with heavy-duty applications like a service…

view full answer...

Answer 2

Hey Bob, welcome back and thanks for the picture! Your Go Power flexible 100 watt panels use MC4 connectors. To replace them rigid glass panels you'll want the 100 watt Go Power Retreat Expansion Kit item #34272634. These panels are sold…

view full answer...

Answer 3

Great question, Jeff! If your trailer has a “Solar on the Side” port (typically SAE or Furrion), you still need a full solar kit like #RS27VR or #RS67VR, which include a controller. The solar prepped trailers just have a port that leads to the…

view full answer...

Answer 4

Hey Jerry! You don't need the Go Power Retreat Solar Charging System with Digital Solar Controller item #34272635. That's a full set up. All you're going to need is an expansion kit like the 100 Watt Go Power Retreat Expansion Kit item…

view full answer...

Answer 5

Go Power Retreat Solar Charging Kit w/ Digital Controller - 100 Watts - 5.43 Amp #34272635 is expandable to multiple panels using the Go Power Retreat-E Expansion Kit - 100 Watts - 5.43 Amp #34272634. If you want more power, you may want to consider…

view full answer...

Answer 6

The hardware with the Go Power Retreat Expansion Kit part #34272634 work out great for wood as most of the RV roofs now days are wood with a rubber overlay. When mounting the panels the Alpha Systems Q130 Butyl Tape part #AL33FJ and the Alpha Systems…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Replacement Solar Panel Recommendation to Work with Go Power GP-PWM-30-UL Controller

Continue Researching