Location of Factory Wiring Connector for 2021 Ford Explorer Limited
Updated 09/24/2024 | Published 09/12/2024
Products Featured in This Question
Question:
I am installing hitch and harness for lights on 21 explorer limited. Installed brake controller in dash, but I cannot find connector at rear of car for trailer plug. Do I have to remove bumper?? Ken
asked by: Ken
Helpful Expert Reply:
Hello Ken; what wiring harness are you trying to install? Do you have the factory tow package on your 2021 Ford Explorer? If you don't have the factory tow package there won't be a wiring connector at the rear of the vehicle. If you have the factory tow package there will be a plug behind the bumper that attaches to the # HM40975.
If you do not have the factory tow package you need to install the Curt 4-way # C56093 which plugs into the connection points in the rear cargo area as seen in the installation video below. Once that is installed you can use the # ETBC7, which is a universal kit, to upgrade to a 7-way.
Ken
9/24/2024
Thanks Robin. I have figured that out. I have another dilemma though. I have no continuity from fuse to box to connector for the brake controller. Thanks, Ken
Robin H.
9/24/2024
Product Page this Question was Asked From
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- No Tow Package
- 4 Flat
- 7 Blade
- Plug Only
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Search Results: 7pin
- Search Results: uscar
- Shop: TowSmart 4-Way Flat Connector Rapid Repair Trailer Wiring Kit
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Q&A: What 7-Way Harness will Fit My 2021 Ford Explorer without Factory Tow Package?
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: Recommended Hidden Trailer Hitch, Wiring, And Bike Rack For a 22021 Ford Explorer XLT
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Parts Needed to Install a Brake Controller in a 2021 Ford Explorer w/out the Towing Package
- Video: The Low-Down on the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package-C55384
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Is Drilling Required For Installation Of Roadmaster Front Anti-Sway Bar on 2026 Jayco Melbourne 24L
- Article: How to Measure for Trailer Hitch Drop
- Q&A: 2025 Kia Sportage PHEV
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
Taffy B.
9/23/2024
got a vehicle that has the tow package and the 40975 was there. the harness that came with it is not plugged in on the vehicle side, where does it plug into the vehicle wiring ?