7-Way Wire Harness Needed For A Ford Police Interceptor

Question

Question:

ford suv interceptor no way to use the 13-18 Ford Police Interceptor Utility CURT 7-way Plug and Play Trailer Wiring other options?

asked by: Edgar

0

Expert Reply:

Hey Edgar,

What is the year/make/model of the SUV. I'm assuming it's a Ford Explorer?

expert reply by: Kevin C

0

Edgar

8/15/2024

Yes 2017

Kevin C.

8/15/2024

@Edgar Ok, I'm assuming the factory wire harness isn't there and that's why you can't use the # C56306? If so you can just switch to a t-connector style harness like the Hopkins # HM40285. This plugs into the factory tail light wiring to get the light signals. If you're needing a 7-way you could then install the # ETBC7 which will connect to the # HM40285 and have a few more wires to run to the battery, a brake controller, and for ground. If you're needing a brake controller then I recommend the Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness # RED52VR. This brake controller has the smallest control knob on the market for an easy to use, factory look.

Helpful Links

tv-install-tekonsha-prodigy-p2-brake-controller-2014-ford-explorer-90885.aspx

Answer 1

Since your 2014 Ford Explorer does not have the two connectors present at the rear of the vehicle what you'd need is the Hopkins trailer wiring kit part #HM40285 which installs by plugging inline with the taillight connectors.

view full answer...

Answer 2

The trailer wiring harness for your 2014 Ford Explorer is actually quite easy to install. Take a look at the picture I've attached. There are two connectors at the rear on the passenger's side. The wiring harnesses we carry, like part #118540…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

7-Way Wire Harness Needed For A Ford Police Interceptor

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching