Is There a Lift Solution for Timbren Axle Less 2,200 lb Kits

Question

Question:

Hello, I have Timbren 2200 axle-less suspension on my tear camper. Is there a kit available to lift the suspension 1? Thanks

asked by: Ken

0

Expert Reply:

Hey Ken, I wish we had a solution for that but Timbren does not have like a spacer setup or anything similar to provide a lift to any of their Axle Less kits.

Only solution we have currently would be the version of the 2,200 lb Timbren Axle Less kit that has a 4 inch lift built into it with the part # ASR1THDS03.

expert reply by: Jameson C

0

Jameson C.

1/19/2026

Hey Ken, did you end up switching to the Timbren Axle-Less kit with the built-in 4-inch lift for your camper? Knowing how that setup worked could help others looking for a bit more clearance on their trailers.

Answer 1

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 2

Hey Thomas, we have the TORTNDR that fits your 2026 Toyota Tundra with our part number #T45MR. We also have the severe duty part #T65MR that is their part number TORTTNDR. What version of the Tundra do you have?

view full answer...

Answer 3

That's a cool set up you have there, and the best option for suspension enhancement for your 2022 Toyota Tundra is going to be Timbrens to help support the added weight in the rear. The correct part number for your '22 Tundra is the…

view full answer...

Answer 4

Hi David, There is an option for bump stops for your 2024 Toyota Tundra with a 3-1/2 inch lift by using Timbrens, you'll just need a spacer kit and some extra spacers to go with it. So what you can use is the Timbren Suspension Enhancement System…

view full answer...

Answer 5

Hey Jerry, you would not need to use any additional spacers with the Timbren kit part #T45MR that fits your 2024 Toyota Tundra SR5. Since your truck is all stock and this kit was designed to fit your vehicle no additional spacers would be required.

view full answer...

Answer 6

Hey Gregg! The overall height of the Timbren Suspension Enhancement System #T45MR is 6". See the attached picture. This is confirmed to fit your 2025 Toyota Tundra 4x4 without a lift. If you need anything else feel free to reach out in the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Is There a Lift Solution for Timbren Axle Less 2,200 lb Kits

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching