Is Spacer Needed for Install of Timbren Kit T45MR on 2024 Toyota Tundra SR5

Question

Question:

I HAVE A 2024 SR5 TUNDRA 2WD, ALL STOCK,,I WILL BE USING A E2 WD HITCH THAT I HAVE USED ON OTHER TRUCKS, I HAVE NOT MEASURED, BUT IN YOUR EXPERIENCE WILL I NEED THE SPACER FOR THESE? ITS ONLY A 2WD, NOT A 4X4,SO NOT SURE IF THERE IS A DIFFERENCE IN THE GAP OF THE AXLE TO THE OEM BUMP STOP. THANKS

asked by: Jerry G

0

Expert Reply:

Hey Jerry, you would not need to use any additional spacers with the Timbren kit part # T45MR that fits your 2024 Toyota Tundra SR5. Since your truck is all stock and this kit was designed to fit your vehicle no additional spacers would be required.

expert reply by: Jameson C

0

Jameson C.

11/3/2025

Hey Jerry, how did the Timbren kit work out on your Tundra with your E2 weight distribution hitch? Your update could make it easier for the next person setting up a similar towing setup.

Answer 1

Hey David, I would test fit everything and see which orientation works best. With the spacer or without. Ideally when the kit is installed there will be 1 inch of space between the Timbren and the frame so whichever orientation gets closest to that…

view full answer...

Answer 2

Hey Thomas, we have the TORTNDR that fits your 2026 Toyota Tundra with our part number #T45MR. We also have the severe duty part #T65MR that is their part number TORTTNDR. What version of the Tundra do you have?

view full answer...

Answer 3

Hey Gregg! The overall height of the Timbren Suspension Enhancement System #T45MR is 6". See the attached picture. This is confirmed to fit your 2025 Toyota Tundra 4x4 without a lift. If you need anything else feel free to reach out in the…

view full answer...

Answer 4

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 5

Hi David, There is an option for bump stops for your 2024 Toyota Tundra with a 3-1/2 inch lift by using Timbrens, you'll just need a spacer kit and some extra spacers to go with it. So what you can use is the Timbren Suspension Enhancement System…

view full answer...

Answer 6

That's a cool set up you have there, and the best option for suspension enhancement for your 2022 Toyota Tundra is going to be Timbrens to help support the added weight in the rear. The correct part number for your '22 Tundra is the…

view full answer...

Answer 7

Hey Ken, I wish we had a solution for that but Timbren does not have like a spacer setup or anything similar to provide a lift to any of their Axle Less kits. Only solution we have currently would be the version of the 2,200 lb Timbren Axle Less kit…

view full answer...

Answer 8

First we have the Timbren Active Off-Road Bumpstops #T83MR for your 2022 Toyota Tundra. These bump stops allow for the most suspension travel while still absorbing road shock to improve your suspension comfort off road. The Timbren Suspension…

view full answer...

Answer 9

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 10

It will! I verified with Timbren for you that your 2023 Toyota Tundra TRD Pro is 100 percent compatible with the Timbren system, with the correct part being the following: - Timbren Suspension Enhancement System #T45MR This is a nice upgrade for a…

view full answer...

Answer 11

I checked with Timbren, and the overall height (from the top of the bracket that bolts to the frame to the bottom of the spring) is 6 inches for the Timbren Suspension Enhancement System #T45MR.

view full answer...

Answer 12

I'm glad you trust us, and we can definitely help you out so you can enjoy your voyage instead of being understandably anxious about the sway. While there is always going to be at least a bit of sway, it should not be to the degree you were…

view full answer...

Is Spacer Needed for Install of Timbren Kit T45MR on 2024 Toyota Tundra SR5

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching