Height of Timbren SES for 2025 Toyota Tundra 4x4

Question

Question:

Hi, I was wondering what the distance is from the bottom of bump stop to where it mounts to the frame. I have a 2025 Tundra 4x4 with no lift. Thank you

asked by: Gregg S

1

Helpful Expert Reply:

Hey Gregg! The overall height of the Timbren Suspension Enhancement System # T45MR is 6". See the attached picture. This is confirmed to fit your 2025 Toyota Tundra 4x4 without a lift. If you need anything else feel free to reach out in the comments below.

expert reply by: Robin H

1

Timbren SES Height
(click to enlarge)

Robin H.

10/22/2025

Hey Gregg, how did the 6-inch Timbren suspension setup work out on your Tundra? Your feedback could really help others looking at the same fit.

Answer 1

Hey David, I would test fit everything and see which orientation works best. With the spacer or without. Ideally when the kit is installed there will be 1 inch of space between the Timbren and the frame so whichever orientation gets closest to that…

view full answer...

Answer 2

I checked with Timbren, and the overall height (from the top of the bracket that bolts to the frame to the bottom of the spring) is 6 inches for the Timbren Suspension Enhancement System #T45MR.

view full answer...

Answer 3

Hey Jerry, you would not need to use any additional spacers with the Timbren kit part #T45MR that fits your 2024 Toyota Tundra SR5. Since your truck is all stock and this kit was designed to fit your vehicle no additional spacers would be required.

view full answer...

Answer 4

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 5

Hey Thomas, we have the TORTNDR that fits your 2026 Toyota Tundra with our part number #T45MR. We also have the severe duty part #T65MR that is their part number TORTTNDR. What version of the Tundra do you have?

view full answer...

Answer 6

Hey good question, Adam. There is not a specific limit on how many spacers you can use with Timbrens. Most trucks that use Timbrens would not be lifted more than 4"-6" anyway, and I have heard of people using up to 6 spacers on each side. I…

view full answer...

Answer 7

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 8

First we have the Timbren Active Off-Road Bumpstops #T83MR for your 2022 Toyota Tundra. These bump stops allow for the most suspension travel while still absorbing road shock to improve your suspension comfort off road. The Timbren Suspension…

view full answer...

Answer 9

The Timbren Heavy-Duty Rear Suspension Enhancement System, part #TFVR001, that you have referenced, is the correct part for your 2000 Mercury Villager. It is designed to attach to the vehicles frame above the rear axle. It will replace the factory…

view full answer...

Answer 10

Hi David, There is an option for bump stops for your 2024 Toyota Tundra with a 3-1/2 inch lift by using Timbrens, you'll just need a spacer kit and some extra spacers to go with it. So what you can use is the Timbren Suspension Enhancement System…

view full answer...

Answer 11

Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.

view full answer...

Answer 12

I'm glad you trust us, and we can definitely help you out so you can enjoy your voyage instead of being understandably anxious about the sway. While there is always going to be at least a bit of sway, it should not be to the degree you were…

view full answer...

Height of Timbren SES for 2025 Toyota Tundra 4x4

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching