Prop Rod Assembly for Leer HF350M on 2021 Toyota Tundra With 5-1/2' Bed

Question

Question:

Hello, I have a Leer HF350M on a 2021 Toyota Tundra Crew Cab - 56inch bed. On the cover it lists truck Model 56TT14, and part 631289. What is the correct part number for the prop rod assembly? Thanks!

asked by: M F

0

Expert Reply:

Thank you for providing that information. What you need is the Replacement Prop Rod Assembly for Leer Tri-Fold Tonneau Covers # LE44MR.

expert reply by: Robin H

0

Robin H.

2/3/2026

Hey, how did the replacement prop rod assembly work out with your Leer HF350M cover on the Tundra? Knowing how it fit could help others trying to match the right parts for their truck bed.

Answer 1

No, the Replacement Prop Rod Assembly for Leer Tonneau Covers #LE54MR is not the correct fit for a Leer HF350M tonneau cover. We currently have 3 replacement prop rods for Leer HF350M tonneau covers. - Replacement Prop Rod Assembly for Leer Tri-Fold…

view full answer...

Answer 2

Replacement prop rods are available for most tonneau covers but we'll need to know the exact model of your tonneau cover to determine the correct replacements. For example, Leer has multiple prop rods for different tri-fold models, like part…

view full answer...

Answer 3

We don't have a way to get just the replacement ends for the prop rod assemblies. Only solution would be the complete rod like part #LE54MR.

view full answer...

Answer 4

By poles I'm assuming you're talking about the gas struts that hold the cover up against the rear window. These poles can be replaced with the Replacement Prop Rod Assembly for Leer Tri-Fold Tonneau Covers #LE72RR. We also carry the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Prop Rod Assembly for Leer HF350M on 2021 Toyota Tundra With 5-1/2' Bed

Product Page this Question was Asked From

Continue Researching