Replacement Prop Rod(s) For a Leer HF350M Tonneau Cover

Question

Question:

Will this replace the prop rod on my Leer HF350M?

asked by: Brennen L

0

Expert Reply:

No, the Replacement Prop Rod Assembly for Leer Tonneau Covers # LE54MR is not the correct fit for a Leer HF350M tonneau cover.

We currently have 3 replacement prop rods for Leer HF350M tonneau covers.

- Replacement Prop Rod Assembly for Leer Tri-Fold Tonneau Covers # LE72RR (fits 631288, 631137, 631130, or 631201)
- Replacement Prop Rod Assembly for Leer Tri-Fold Tonneau Covers # LE44MR (fits 631404)
- Replacement Prop Rod Assembly for Leer Tri-Fold Tonneau Covers # LE94MR (631405)

You will either need to locate your cover part number to determine the correct replacement, or if you can provide me with the year/make/model and bed length of your truck, I can try and narrow it down for you.

expert reply by: Jesse M

0

Answer 1

Thank you for providing that information. What you need is the Replacement Prop Rod Assembly for Leer Tri-Fold Tonneau Covers #LE44MR.

view full answer...

Answer 2

Hey Tim! We actually have all of those parts available. You need the following: -Replacement Prop Rod Clips for Leer Tonneau Covers #LE22RR (208364) -Replacement Quick Release End for Leer Tonneau Covers #LE52GR (139514) x2 -Replacement Snap-On Ball…

view full answer...

Answer 3

For your Leer Hard Tonneau Cover #LE82FR on your 2019 GMC Sierra 1500 you'll need the Replacement Prop Rod Assembly for Leer Tonneau Covers #LE37MR.

view full answer...

Answer 4

What you're looking for, for your Leer Hard Tonneau Cover #LE44FR is the Replacement Prop Rod Assembly for Leer Tri-Fold Tonneau Covers #LE94MR .

view full answer...

Answer 5

The #LE77FR is for the 5' bed so you must have the #LE87FR since you have a 6' bed on your 2020 Chevy Colorado. The parts are listed for the cover they fit instead of by length to ensure you get the correct part since they are cover specific.…

view full answer...

Answer 6

Hey Michael, The Leer tri-fold hard tonneau cover that fits your 2021 Ford F-350 with a 6'8" bed is the Leer Hard Tonneau Cover - Tri Fold #LE42FR. We do have the correct replacement prop rods for that tonneau cover, and for that all you…

view full answer...

Answer 7

Hey Chris, For the Leer Hard Tonneau Cover #LE54MR on your 2015 Ram 1500 6.5' bed you'll need the Replacement Prop Rod Assembly #LE24MR.

view full answer...

Answer 8

We do have the part you need, but it's different than the one you mentioned. I checked with Leer, and the correct replacement prop rod for the Leer Hard Tonneau Cover #LE42FR on your 2018 Ford F-250 is the following: - Replacement Prop Rod…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Replacement Prop Rod(s) For a Leer HF350M Tonneau Cover

Continue Researching