Gauge Wire to Use to Extend Wiring of Valterra EZ Valve # E1003VP

Question

Question:

What wire size (AWG) would you recommend to extend the 7 foot cable that comes with the Valterra EZ Valve Electric Waste Valve for RV Black Water Tank # E1003VP?

asked by: Taylor H

0

Expert Reply:

Hey Taylor, it looks like the Valterra EZ Valve part # E1003VP that you referenced uses 16 gauge wire but since I think 14 gauge wire is easier to work with that would be what I would go with. The amperage draw of this is pretty light so you wouldn't need to really worry about overdrawing the wiring either.

expert reply by: Jameson C

0

Answer 1

The switches of the Valterra EZ Valve Electric Waste Valve #E1003VP that you referenced are considered weather proof but I would still recommend you install them away from direct rain and weather. You'll have to use your best judgment but under a…

view full answer...

Answer 2

Yes you are correct Valterra EZ Valve Electric Waste Valve for RV Black Water Tank part #E1003VP does come with everything you will need. The confusion came from the spigot or hub ends and which one they needed for their application in that question.…

view full answer...

Answer 3

The difference between a hub connection and a spigot connection is that the hub is the female end and has a lip on the inside that stops the spigot (or male) end where it needs to be. I have attached some pictures to assist. With this knowledge it is…

view full answer...

Answer 4

The Valterra EZ Valve Electric Waste Valve System #E1003VP that you referenced is designed to fit standard RV waste setups that use 3 inch pipes like what a 3 inch Bristol hub is so yes, it would work.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…

view full answer...

Answer 7

It sure would Irene! The Dometic 411 RV Toilet item #DMC84JF would indeed be a good replacement for a Dometic 301 like item #DOM24FR. It's going to install the same way and match your current toilet flange. It'll drop right onto the flange…

view full answer...

Answer 8

Hey Michael! The 2026 Kia Sportage Hybrid has the 12V battery integrated into the main battery so you won't be making a connection there. What you need to do is run the #C59236 hot lead to the 12V positive jump terminal under the hood. Everything…

view full answer...

Answer 9

Hey Jon, happy to help. Yes, I was able to find the replacement parts to #BM44YR. The 90 degree angle #BM99RR and the check valve #BM98GR have 1/2" MPT fitting that connect directly to your B&B RV Water Center. So no worries about…

view full answer...

Gauge Wire to Use to Extend Wiring of Valterra EZ Valve # E1003VP

Continue Researching