Does 2-1/2 Inch Curt Trailer Hitch Receiver Fit 2009 Dodge Ram 3500

Question

Question:

I want to know if this fits dodge 2009 3500 slt ram dually 4x4 6.7L diesel

asked by: Jeff

0

Expert Reply:

Hey Jeff,

It sure does; the Curt Trailer Hitch Receiver # C15809 does indeed fit the 2009 Dodge Ram 3500 dually.

expert reply by: Kyle S

0

Jeff

5/30/2024

Thank you for the reply, This also leaves the stock hitch on truck as well correct?

Kyle S.

5/30/2024

@Jeff Yessir, the factory hitch does indeed stay on your Ram.

Answer 1

Hey Don, Curt does have a Class V hitch for your Ram but it sits super low so it's not going to be what you want. Draw-Tite offers Trailer Hitch Receiver #DT45509. It has a 2-1/2" receiver tube opening, 18,000lb gross towing weight/2,000lb…

view full answer...

Answer 2

While we haven't had the opportunity to install the Curt #C15809, Curt #C15704, and Draw-Tite #DT45509 hitches, from what I could see in the photos customers have sent in it looks like the Draw-Tite will actually sit right up next to the bumper…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hello Zack, Yes, the #C15704 and #C15809 are very similar. The difference between the 2 is going to be ground clearance. The #C15809 hangs lower and is going to give you around 3" less of ground clearance. The #C15704 sits a little higher…

view full answer...

Answer 8

Hey Todd, welcome back! Using the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect item #TLA7311S and installing the SuperSprings SuperSway Stops item #SS75GR will definitely help with sway. They're going to prop up your leaf springs and…

view full answer...

Answer 9

You are going to need to replace your 2 inch trailer hitch on your 2008 Dodge Ram 3500 with one with a 2-1/2 inch opening so that you can use your 40 inch hitch extender. For that you would want the Curt hitch part #C15809 which is a confirmed fit…

view full answer...

Answer 10

Hey Jay, yes the Curt front hitch part #C31017 that you referenced is correct for your 2007 Dodge Ram SLT quad cab 4x4 as long as it's a 2500/3500. If instead you had a 1500 you would want the Curt front hitch part #31320. What are you planning…

view full answer...

Answer 11

Hey Terry! I have some awesome news for you. The B&W Turnoverball #BWGNRK1313 will absolutely, 100% fit and work for your 2012 Ram 3500 Diesel Mega Cab. In fact, this particular model is specifically designed for the diesel engine models of your…

view full answer...

Answer 12

Hey Adam! Yes, the Trailer Hub and Drum Assembly #TRU66AV will work as a replacement on your axle. This fits the standard #84 spindle found on 3,500 lb axles and has a 5 on 4-1/2 bolt pattern. Then for replacement brakes you can use the etrailer…

view full answer...

Does 2-1/2 Inch Curt Trailer Hitch Receiver Fit 2009 Dodge Ram 3500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching