Replacement Powered Awning For A 2022 Grand Design Transcend 247BH Xplor

Updated 05/28/2024 | Published 05/21/2024

Question:

I need a replacement power awning kit for my 2022 Gran design transcend xplor 247bh.

asked by: Johnny L

Expert Reply:

Hey Johnny,

There unfortunately isn't a guide to tell us the correct awning needed for your trailer so we'll need to get a measurement first to determine the best fit. I'm assuming you're replacing a different awning and not adding one in where there isn't already one. If this is the case then you'll wan to measure from the center of one awning arm to the center of the other awning arm to determine the length.

Once we know the length I can start looking for the right kit to fit your trailer.

expert reply by: Kevin C

Awning Measurement Guide
(click to enlarge)

Johnny

5/25/2024

Thanks for helping me out on this. I'm replacing the original factory awning. I ran into a tree and messed it up. It's listed as a 15 foot awning from Grand Design. I measured it and it's 15' from center to center and it's a solera brand from LCI.

Kevin C.

5/28/2024

@Johnny To replace your old 15' awning you'll want the Solera XL 12V Power RV Awning # LCV000334950-362243. You'll also want to pick up some butyl tape # AL28FJ to help hold the awning arms in place with you mount them, while also creating a waterproof barrier so nothing can leak in through the screw holes and waterlog the walls. I typically also use a bit of silicone over the head of the screws for some extra protection.