Availability Of Replacement Hardware For Curt 13322 For A 2003 Chevy Silverado

Question

Question:

I need just the hardware kit to mount the curt for 2003 silveradodo you sell separately

asked by: Renee G

0

Expert Reply:

Hello Renee. It sounds like you are looking for a replacement hardware kit for the Curt Class 3 Hitch # 13322 for a 2003 Chevy Silverado. We can provide a hardware kit with part # RHK. Once you go to the page for the # RHK there will be a box where you enter the part number for your hitch. In this case you will enter the part number 13322 in this box before adding to your cart. This will get you a complete hardware kit for installing your hitch.

expert reply by: Jesse M

0

Answer 1

The Curt #13322 Class III hitch uses a total of 6 bolts, two 1/2 inch carriage bolts and four M14 bolts. The 1/2 carriage bolts have a smooth round head on them, while the M14 bolts have a hex head on them so they can be tightened with a wrench.…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

Hey Frank. I can give you the dimensions of the shank on the B&W Continuum item #BW28FR but you're going to need to take the measurements on your Silverado 3500 to confirm the tailgate will open. From the hitch pin hole to the center of the…

view full answer...

Answer 9

Hey Charles, Yep, the Demco Autoslide 5th Wheel Trailer Hitch for Chevy/GMC - Single Jaw - Underbed #DM36SV is a kit that includes the Underbed Rail and Installation Kit #DM8551004 and the Demco Autoslide 5th Wheel Trailer Hitch #DM8550022. The…

view full answer...

Answer 10

Hey Michael! For some reason Toyota decided to use a double wall design on their receivers, which is why your old hitch pin won't fit. I recommend the InfiniteRule Hitch Lock for 2-1/2" Hitches #34061072-D for your 2022 Tacoma. This has a…

view full answer...

Answer 11

Assuming that when you tested the resistance of the brakes you were testing the two wires on each magnet and getting 2.0 and 2.8 ohms the magnets on your trailer are not working correctly and will need to be replaced. For 7" brakes you should…

view full answer...

Availability Of Replacement Hardware For Curt 13322 For A 2003 Chevy Silverado

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching