Identifying Hardware Included with Curt 13322 Class III Trailer Hitch

Question

Question:

Wich are the m14 bolts and the 1/2 fastners?

asked by: Norberto C

0

Expert Reply:

The Curt # 13322 Class III hitch uses a total of 6 bolts, two 1/2 inch carriage bolts and four M14 bolts.

The 1/2 carriage bolts have a smooth round head on them, while the M14 bolts have a hex head on them so they can be tightened with a wrench.

I've provided a diagram showing the difference between the two types of bolts that shows precisely where they're installed. I've also linked to an installation video that you may find helpful.

expert reply by: Mike L

0

Identifying Hardware for Curt 13322 Class III Hitch
(click to enlarge)

Answer 1

Hey Kerry, thanks for reaching out. The Curt #13301 is definitely what I recommend here. All of the hitches you mentioned, the Curt #C13061, #13322 and #13301 all fit the 2013 Silverado, but the #C13061 is only for the 2500 and 2500 models, so that…

view full answer...

Answer 2

Hello Renee. It sounds like you are looking for a replacement hardware kit for the Curt Class 3 Hitch #13322 for a 2003 Chevy Silverado. We can provide a hardware kit with part #RHK. Once you go to the page for the #RHK there will be a box where you…

view full answer...

Answer 3

Hey Byron, unfortunately the Curt Trailer Hitch #C14061 is not going to work with your 2013 Chevy Silverado 1500. Instead, you'd have to use the Curt Trailer Hitch Receiver #13301, which will fit your truck. If there is anything else I can do for…

view full answer...

Answer 4

Yes, the Curt hitch part #13301 is a fit for your 2008 Chevy Silverado 1500.

view full answer...

Answer 5

Good question, and there is just a single difference between the Curt and etrailer trailer hitches that fit your 2010 Chevy Silverado 1500, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you…

view full answer...

Answer 6

Yes, I checked with Curt and this Curt Trailer Hitch Receiver, part #13301, is a confirmed fit for your 2011 GMC Sierra 1500. I attached installation instructions for you to check out. You may be interested in the following products to complete your…

view full answer...

Answer 7

The correct bolts to connect the head of your Curt A20 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package #C84FR to the its legs are the: -Replacement Hardware for Curt 5th Wheel Hitches #C35U5. This kit includes 4 each of the needed bolts,…

view full answer...

Answer 8

You did not mention if your 2013 Chevy Silverado was a 1500, 2500, or 3500 so I can provide recommendations for all 3. For a 1500 I recommend Curt trailer hitch #14301. There is no drilling or trimming required for installation of this hitch. I have…

view full answer...

Answer 9

I think the legs will fit just fine. To fully open the locking arms, they're turned 90 degrees from their locked position, which does NOT have them pointing directly to the front which would place them close to the fuel tank. Since the locking…

view full answer...

Answer 10

Great question! You will be happy to know that you can utilize your Curt A16 Slider #C16521 with the puck system on your 2022 Ram 2500. All you need is the Adapter #C16022, which fits the long and short beds, to accomplish this. If you have the short…

view full answer...

Answer 11

Hey Tracy! The MORryde GooseTech does not offer any additional clearance for a short bed. You typically won't be able to make a 90º turn with a short bed but you can use an offset ball like #GY43XR (safety chains loops #C60691 are also…

view full answer...

Answer 12

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Identifying Hardware Included with Curt 13322 Class III Trailer Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching