You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…
Hey Jason, it's pretty common for replacement leaf springs to be slightly shorter than what they replace as springs tend to stretch/flatten overtime as they wear out so while you are on the right track 3/4 of an inch is a bit too much of a…
A keen observation indeed, Brett. The mounting hole spacing on the Square D-Ring Tie-Down Anchor #ABS69FR is 3" horizontally and 3-1/4" vertically. I edited a picture for you to help illustrate.
The Dexter axles you have are 7k rated based on the part number you mentioned so the etrailer leaf springs part #e64SR that you referenced would be the correct part number as long as your current springs are right at 25 inches unloaded. If you have a…
Hello Billy, We do not currently have the the Thetford outer access door part number 2680527 on out site. I submitted for it to be added. With it being the Holiday Season this might not be accomplished until next week. I will be keeping a very close…
Hey Rodney, it sounds like you've done your homework! That MoRryde set up you referenced is definitely going to upgrade your Dutchman's suspension and make towing it more comfortable. You'll want to take two measurements before ordering…
Hey Bekzod, So while we don't have a way of knowing the exact leaf springs for your Arctic Wolf 5th wheel trailer, I can help you determine the correct replacements. You do have to take a measurement, though it's pretty easy, as all you need…
You are indeed right to think this way. When picking out the appropriate leaf springs for your custom built trailer you will want to choose them based on what the actual loaded weight of the trailer will be. Just make sure that the leaf springs have…
We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.
You do want to measure the springs with the weight off of them because they will flatten out with the weight added. Over time, springs can flatten a bit and that is why you are getting the 26 inch measurement. Based on the measurements you provided,…
Hey Mark, I looked up the specs of the spring you have now and found that it is a 24-3/4 inch long spring from eye center to eye center and for a 7k axle. So that means that the replacement spring part #EM28AJ that you referenced will work great as a…
Hey Shawn, so the part #VOM74MM that you referenced is just the monitor and does not include a camera but I can say that it really just depends on the angle of the camera that you mount what you will see and how useful the monitor and camera will be…
Filter Results
