Don't Miss These Holiday Savings!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be showing our performance tool Seal Puller, Part Number PTW1219. We have 2 different size edges here for the different size seals that you need to pull. This is for a thicker, deeper seal. This is for your more shallow seals. Got a heavy-duty, chrome-plated shaft that gives you nice leverage when pulling your seals out. All right. Let's got pull our seal out.
We've got a seal in place. I'll stick my thicker edge in there. Just kind of wedge it in, then I'll just pull back towards me. You may need somebody, or put your hand on the other side, just so you have extra leverage. It's that simple.
Just that extra leverage to get your seals out. That's it for our look at the performance tool Seal Puller, Part Number PTW1219.Speaker 2: You can find this and everything else right here at etrailer.com. What's up, man.
Average Customer Rating: 4.7 out of 5 stars (120 Customer Reviews)
Finely got around to repacking the wheel bearings on our Scamp 13 travel trailer. The seal puller popped out the bearing seal without damaging. Now I have a spares for an emergency back up. The bearing grease packer also saved time and made the job much easier.
I have ordered all my towing and trailer news from etrailer. Their business model, web site and customer service personnel are second to none.
Great tool.Better than prying them out with a screwdriver. Thanks,Mike
It’s a tool that has one job, but it did that job to the best of its ability. Much easier than using a screwdriver.
Works as intended
Very simple tool but very effective. It's not good for anything else so far as I can tell but it's the right tool for pulling grease seals and if you don't have the right tool it's just a much harder job.
Dan
12/7/2021
Does what it’s designed for very easily and efficiently with no potential for damage to hub or bearing. Should have bought one years ago.
Everything work great!!
Personal service was great. Received a call regarding an address issue; person from etrailer wanted to make sure address was correct prior to shipping. This ensured order received without delay. Axels are a perfect fit; on-line videos for installation are very helpful. All your videos are well done; informative and helpful. Prices were better than any local suppliers in the area. I still trade with local businesses, but for large purchases I go to etrailer.
The seal puller is a must have tool, works great!!
Everything great!!Thanks!
Seals bought for a marine application. The ordered ones haven't been installed and probably wiii not be used till next year. I like having spare seals and bearing kits on hand. Will update at a later date. I think the bearing seal puller is a much better idea than trying to get the old one out by other means.
I really like etrailer.com! From their outstanding web site with its helpful videos to the ease of ordering and paying to the quick delivery and follow-up after shipping, they hit on all cylinders! I Just received the two trailer tools today so haven’t used them yet but the quality and workmanship of their tools is very high and I have no doubts that they will do an outstanding job!
I only used the tool once, but it got the job done. Replaced bearings and seals on my SureTrac trailer.
Everything I needed in one kit
This puller works, but beware. I used the fat end at first, but that seal was in there really tight. I then switched to the thin end. The seal did finally inch out with some leverage, but I bent the bearing slightly in the process. I'm thinking the pullers that hook in and then are tapped upward with a hammer might be a bit safer than this style.
I finally used the seal puller yesterday. It was my first time using the tool. It was a little harder than I anticipated to get the seal out but it worked much easier than trying to tap it out with a brass drift. I am glad I found this tool after doing the other way for years!
Great experience from locating product to checking out and payment. Fast shipping, great shipped tracking system, fast delivery. Would recommend ordering from these folks if you want a good outcome.
If you do wheel bearings, this is a must have tool. No fuss no muss, pops the seals right out with minimal effort.
Excellent tool. Makes seal removal so much easier. Highly recommended if you have several vehicles/trailers and do your own wheel bearing maintenance.
Shipped same day ordered. Used to use claw hammer to remove seals which was often difficult. This tool made it easy to remove the grease seal when repacking the wheel bearings.
Excellent ordering, delivery, and follow up experience. I highly recommend e-trailer. Kind Regards, Richard R., Ocala, FL.
It is a very good product. Works get and makes the job working on greasy she'll bearings and seals a whole lot easier.
You all have a great website with great products.
Works well for removing old seals, however if the tips were modified to be widened cross way with a flat tip, it could possibly remove good seals without damage so they could be reinstalled when cleaning/inspecting bearings.
I actually did not need this tool. The seal came out in better shape by simply driving the inner race out
The whole experience was excellent. I installed new brake shoes and seals today. The parts were a perfect match. I ordered the parts during the Christmas rush and was told they should arrive within a week and half which was no problem to me. They arrived in less than 4 days and the job is done. Very professional. Thank you!
Pulling seals ,from my trailer hubs, is quick and easy.
works great, pulled seals easily when i repacked wheel bearings.
Do you have a question about this Lubricants Sealants Adhesive?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Greg K.
11/11/2017
Thank you for asking. This kind of follow up as well as you customer service is way I will continue doing business with etrailer. In the past year my wife and I have towed our 13 ft Scamp camper just over 10,000 miles. The etrailer equipment I installed has worked reliably for that time and miles. I have recommended etrailer to any one who will listen and to other Scamp owners on a FaceBook page.