Recommended Storage Cover For A Little Guy MyPod Camper

Question

Question:

Looking to purchase a cover for a little guy MyPod camper. Need it to fit the camper with vent and roof rack installed. Thank you

asked by: Fredrick K

0

Expert Reply:

Hello Fredrick. That Little Guy MyPod Camper is pretty neat. It is a bit of a unique shape too. Based on the specs I could find online they are about 11.5' long and a little over 5' tall. Our best option for a cover for this camper is the Classic Accessories PolyPro III Deluxe RV Cover # CA80198. This cover is made for teardrop style trailers up to about 13.5' long. This extra length on the cover should allow plenty of room for your roof rack and vent. The cover also features integrated straps which will help get a snug and secure fit. We test fitted this cover on our HYK teardrop trailer which is a similar quite small single axle camper. The picture below will show you a good example of how the cover will look.

expert reply by: Jesse M

0

HYK Trailer With Classic Acessories Cover
(click to enlarge)

Fred K.

4/3/2024

Can you quote me the cost for the cover. What's the lead time from production of delivery. Thank you for the quick response.

Jesse M.

4/4/2024

@FredK You can see our current pricing below. Right now it would be free shipping as long as you are within the contiguous USA. This will ship from our warehouse in Missouri. Depending on distance it usually takes only a few days to arrive. We do offer faster shipping if needed.

Answer 1

It sounds like you are looking for a spare tire carrier to use on the a-frame portion of your Little Guy Trailer. If that is the case then I do have an option for you but the Folding, Bumper Mounted Tire Carrier part #TR-2 won't work as it is…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Lawrence, thanks for reaching out. The Curt T-Connector #C56040 is correct for the 2025 Subaru Forester Hybrid. The factory harness plug should be in the rear cargo area behind the driver side access panel. If you remove the trunk floor covering…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Recommended Storage Cover For A Little Guy MyPod Camper

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching