Will the Thule Swing Away Adapter Work with a Thule Pro XTR Bike Rack

Question

Question:

Will the Thule T2 Pro XRT 2 bike hitch rack work with the Thule Swing Away Adapter? I realize the later is discontinued but found one online Thanks!

asked by: Eric

0

Expert Reply:

Yes Eric, the Thule Access Swing Away Bike Carrier 9037 will work great with your Thule T2 Pro XTR Bike Rack for 2 Bikes # TH83JV.

expert reply by: Bryce D

0

Answer 1

There isn't a perfect spot on the Thule T2 Pro XTR Bike Rack for 2 Bikes part #TH83JV for the Optronics License Plate Light part #LP55CB. That's because they really aren't designed to be used with one another, it requires retrofitting.…

view full answer...

Answer 2

Thanks for reaching out! To add tail lights and a license plate to your Kuat NV 2.0 Bike Rack #NV22G I recommend picking up the Curt Auxiliary LED Indicator Lights #C53201 and the Thule License Plate Holder #TH35JV - you'll need to splice in the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Will the Thule Swing Away Adapter Work with a Thule Pro XTR Bike Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching